Old Seats - New Seats - pic's

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I don't know...kinda like the Duct Tape Upholstery.




Actually like the Civic seats, nice job.


I was given a pair of Saturn seats and was making brackets anyway, so that's what I have. Upholstered in my choice of materials, from a trim guy.



Couldn't pass them up.

Ed
 
Super. Was the bending/drilling done on the seat rails or the OEM Cruiser frames?
 
You are right on the fire extinguisher - it extinguished my head this morning!

I just bent the seat frames to fit - drilled two holes - with self tappin screws -

They sit a bit high - the steering wheel is way closer to my legs -
 
freight , we got same seats , I like em alot too.
I used the factory brackets ( had to move the mount tabs over 1.5" on pass side)
Ground the rivets and took the runners off factory seats
sawzalled the Honda seat brackets down
welded to yota runners
bolted back in all factory holes.
My pass. sits 2" higher than me and that seat is as low as it goes due to tank.
 
I just got through putting in new seats too. Seems the common problem with everyone is the height problem. My new seats have me an inch or two higher as well, and I took off the little motor and auto adjustment rails that came with the Volvo seats. The passenger seat is pretty much as low as it can get with the gas tank. I could fab new mounting platforms for the drivers side and maybe lower it a couple inches, but then getting things into and out of the tool box is a problem. I will probably just leave it. The stock bus driver size steering wheel is awefully close to my lap as well. The seats are very comfortable though. Next winter the heated seats will be nice too.

troy
 
When I do the power steering set up I will probably try to put the steering wheel as low as possible so I can also move the drivers seat down. Maybe I will be able to see the green light at the intersection without having to lower my head. As far as the passenger seat. That's not going any lower unless I re locate the tank to the aft of the rig.
But those are some sweet seats man!
 
Pee - cool, love the seats - mine seem to sit a bit to the right - I like how you fabbed the brackets - you are better man then me!

Thought about putting a smaller steering wheel in - but it costs more than the seats -

Yep, had to take out the sun strip so I could see out -

Now to ebay the old seats.......I have a set a 60's and 40's
 
Back
Top Bottom