VERY LUCKY... Same thing happened to me. Unscrewed the filter and there was hardly any oil in it. I have always had a mess when I unscrewed filters on the 1FZ-FE.
WIX Filter failed on my son's 97 this past weekend. Part number 51348. Filter had roughly 2k miles on it. I jumped in his truck a couple of days ago to move it and noticed the oil pressure lower than normal and heard the knock. 1st thing I ddi was grab a new toyota filter and installed...
Found the issue. PO installed a new radiator and looks like they accidentally placed it on top of the tranny cooler lines. Fluid was fried. I dropped the pan and replaced the old filter (which looked fine), cleaned the pan and magnets (all were free of metal bits). We replaced fluid with...
Thnaks. That 5.9 setup is bad ass btw. Just looking for any ideas why fluid is not getting to the cooler. Hoses do not appear to be clogged. Is there a temperature that the tranny fluid has to reach before it’s pumped to the cooler?
Hello Folks.
Bought my son a 1997 CE 80. Rig has just over 200K. Its been great to spend time with wrenching on it and seeing his appreactaion is priceless. We knew the rig has a so-so maint history going in so we are working our way through it baselining everything.
We got to the tranny...
Just finished this a couple of weeks ago. Stripped the last screw! Luckily it was the lowest one/easiest to access. I was able to drill it out with a Craftsman easy out used as a drill bit. The power tool I used was a Craftsman angle impact drill. Worked great!
I retorqued the crank bolt...
Spray a little windex on the belts (very carefully). If they quiet down prolly just need to order some new ones form CruiserDan. If they continue to chirp you can easily remove the A/C belt to see if that idler pulley is the culprit. If it still make noise then you might want to investigate the...
80ways---can u provide some more detail as to how you did that. Did you remove the radiator? This is new territory for me so any help would be much appreciated.
Thanks.
Hi guys. In the process of trying to replace my oil pump gasket (following Zane's writeup) and got everything removed.... got to my 7th screw on the oil pump cover (easiest one to access from below) and I stripped the head. Tried everything I can think of including one of those easy out...