Search results for query: *

Forum search Google search

  1. C

    a/c warm/cool not cold intermitently?

    You might want to see if the clutch is engaged on the compressor when it blows warm. Had a Ford terrorize me w/ intermittent cooling problems and it turned out that under certain temps the clutch wouldn't engage on the compressor due to the air gap on the clutch hub. Took the clutch...
  2. C

    Cross Caster issue - any solutions?

    Your rear thrust angle was .28 out. That's what left of your pull. Do you have a bent trailing arm in the rear or a bad bushing??
  3. C

    Max Youve Ever Towed...

    I hauled my toolbox from my old shop to the new one two weeks ago and the cruiser was on the bumpstops the whole way. I'm guessing I was in the 6,000lb range, and the toolbox was forward of the trailer axles but not to the front. Only went 12 miles and I really need to get my dually back together!
  4. C

    a/c warm/cool not cold intermitently?

    When it goes over 80 outside and the A/C starts getting warm that means your low on freon. Look for the sight glass on your drier while the A/C is on and see if theres bubbles. If you see them you're low.
  5. C

    91 3fe P/s pump

    I just went outside and looked at mine. Take the either 14mm or17mm nut out of the center of the pulley and remove. Should come right out. Sometimes they can be a little stubborn and have to tap lightly w/ rubber hammer from behind to get em off.
  6. C

    Need help fast!

    Cool, then the 1FZ and the 3FE are the same....
  7. C

    Need help fast!

    I'm just going by memory....:grinpimp: :beer:
  8. C

    Need help fast!

    I checked the Autozone website and looked up the firing order and it said 123456 for your engine. Mine is the 3FE motor in a 91 so it's the 15 is too young,36 is too old, and 24 is just right firing order.:D
  9. C

    Need help fast!

    1 2 3 4 5 6 as I recall.
  10. C

    1997 Lx450 --- Crossed Jumper Cables

    Wow, They go that high on amperages! I think the parts stores may only go to 60 amps on bulk fusable links.
  11. C

    Help ---but take it easy

    It's in your User CP.
  12. C

    Noise after regear

    If it's the rear then they may have pulled the rear cover off to inspect. Keep us posted.....
  13. C

    1997 Lx450 --- Crossed Jumper Cables

    I had to make a poor man's fusable link one time for the RX-7 while the dealer ordered a new one. Mine was a 40amp link so I bought a 40amp fuse and crimped the connectors I needed to some wires. You can even buy the fusable link wire at the auto parts stores and replace the blown ones as well...
  14. C

    Noise after regear

    Umm, I've installed probably 100+ gear sets now and none have been noisy except my first one.:D If you have alot of noise on acceleration then none on decel it sounds like the pinion is too deep. I've heard from some of the mechanics in my circle that a little bit of noise was heard on the...
  15. C

    A/C evaporator R&R

    You need to pull the entire unit(evaporator case only) out to get to the clip in the back. If you force it you can break the case half.
  16. C

    3FE Oil Pressure

    Mine is 3/4 the ways up when traveling highway speed and 1/4 of the way up idling.
  17. C

    knock,knock, knock

    You said the diff oil was really grey. I hope it's not the metal color grey. Can you try to drain a little out or all of it and look at the fluid under some good lighting? See if theres metal flakes in the oil. If you drain the fluid, check the drain plug since it is magnetized and see if theres...
  18. C

    OEM Windshield question for CDAN

    Don't the windshields on the higher end vehicles have something made w/ the glass?? I've noticed since I bought the LC that the windshield beads water like my Porsche does. It's hard to explain, it's like theres wax on it and it always wipes clean w/ the wiper blade. I have various other cars...
  19. C

    Need Help With A/c

    Most cars and trucks are built w/ high speed fan relays since the highest speed has the most current flowing and kills most speed switches. I'm sure the Land Cruisers do this since my mom's Previa did and I've already been through this on hers. Can't say this is the prob or where it is but maybe...
  20. C

    Found a source for Copper and variable thickness headgaskets

    I've used some of their solid copper head gaskets on race motors but haven't used any of theur stuff in stock form. My Dodge diesel has .020 thicker head gasket than stock because of variations in my deck surface. The machine shop took .020 off the deck to make it flat. I currently have a custom...
Back
Top Bottom