I have to sell my 96 LX450, purchased a 2006 LC. The driver seat is totally destroyed, see pic, don't want to sell the truck this way. I am looking for a more decent beige leather seat cover. Anyone has one to offer me?
Thank you all
RavenTai, thank you fro your input, i have that same P0401 issue on my truck and did all steps per FSM and found nothing wrong (I have access to the Toyota scan tool), i checked the EGR temp with scan tool during a road test and it was fine. Now the P0401 appeared again and it is intermittent...
I have ordered new bushings on friday and received this morning at 110$ Can each. The new bushing are 1.329 in ID before installation. The bushing probably shrink when inserted into the spindle because of the press fit. Dealer told me that it is his first sale of those bushings. I will...
I am rebuilding the front axle using the steps in the service manual and i am at the steering knuckle bushing. In manual, it says to inspect bushing for wear and replace if damaged. The question is: What is the discard diameter of this bushing. On passenger side, diameter is 1.380 in and on...
For the air compressor, I purchased a 6.98$ air compressor at Canadian Tire and it works just fine. I paid 16$ for the cylinder (9$ + 7$ S&H) and 17$ for the solenoid valve (10$ + 7$) plus compressor (7$) and hoses and fittings (10$). That is why i wrote that cost me about 50$. Everything...
I got the same problem on my truck and i developed a fix that is cheap and easy (50$ and 4 hours) and is proven by two years of use. See it https://forum.ih8mud.com/showthread.php?t=108306
If you need the files, i can send it to you, just give me your e-mail adress.
I think it would also work with vacuum, the cylinder is 32 mm diameter or 1.25 sq in. in surface and you need about 10 lb to engage the lock. This means you need about 15 in. Hg of vacuum to engage it. What i like with my system is that i know if there is a air leak in the system because the...
There is a cylinder for sale on ebay http://cgi.ebay.com/Festo-Pneumatic-Short-Stroke-Cylinder-ADV-32-25-A_W0QQitemZ7562003867QQihZ017QQcategoryZ67010QQssPageNameZWD1VQQrdZ1QQcmdZViewItem
Looks like a better cylinder than mine with same spec. The fit is very tight with the diffenrential...
Answers to questions:
The cylinder is double acting and is 32 mm diameter and 25 mm stroke. The system needs a 19 mm stroke. I installed a spring the cylinder to limit the stroke to 19 mm but if you keep 25 mm should not be a problem. The springs also make the system fail safe off in sense...
My rear diff lock actuator was having extensive damage. It was full of rust inside, all gear, shafts everything heavily rusted and completely seized, the motor rotor was falling into pieces, i live in Canada where road salt in winter affects everything. I called dealer and i did not want to...