I just tried to put my hard half doors on, and both doors were kind of a hassle to put on. Not the doors, exactly, but the mechanism to close didn't match up with the latch pin they sent with the doors. I had to put a washer in the driver side door to get it to work properly, and the passenger...
I've had mine for a while and have had no problems with it. It's sitting behind an H41, with 4.11 gears in the axles and 33's at the ends, and it wheels great! Almost too low, though. It gets old having to switch back to 4-hi so that I can get to the next obstacle. But I wouldn't have it any...
does lojack have to be connected to a battery? Or could I strap it down to the head unit, so if the HU was stolen rather than the entire car, it could be found?
I got my lights today, ordered some for the dash ledge, speedo lights, and the headlight switch, how on earth do you change the light in the headlight switch? Thanks for the help.
don't take my word for it, but it looks like your generic lunchbox locker. I think you're missing (maybe) springs and c-clips, but I think the c-clips come out of the third.
Slave cylinder. I can pretty much gaurantee you that it is on its last leg. Replace it, rather than rebuild it, and do the same for the master cylinder. Cover your bases and you'll be alright. Easy start to getting to know your cruiser. And welcome!
Checked FAQ and searched, couldn't find it...
What is the best knuckle upgrade for a 76 40 axle? Actually, lets say a 73. I am going to swap the guts into a housing that is set up for SOA pretty soon (from 76 to 73) and want to get all of the steering done right as well. What...
check all the big wires coming from the battery. sometimes one of mine that powers the starter will slip off and the starter can't even try to turn, but everything else works. Start small
Today I was just cruising down a road about ten minutes from my house when I noticed a plume of smoke behind me. I pulled over and turned the truck off. turned it back on and smoke came out, then stopped, and would come out when I pushed the gas, then stop when I let off. Start driving home...
I don't know if I'm thinking of the right thing, but isn't what broke the master cylinder of the clutch system, so what connects to the pedal? If that broke or just got stuck or whatever, I would just replace the entire thing, along with the slave cylinder. Both are relatively cheap and I have...