Geanes is on point with the links. When ordering the spacers, I left a note in the order comments to notch the fronts for the flange bolts. Larry followed up with a text the next day confirming year and requirement for notching. Took about two weeks from order to receipt.
Ok, so not abnormal for it to drop to low 13s at times. Admittedly, I haven't driven it much since the new alternator. I'll give it a little more and observe behavior. Thanks!
So I bought my 100 last year around this time. Service history showed recent alternator and battery replacement, which I thought was a good thing. I've put about 5k miles on it and have had a few experiences where the low battery voltage light comes on, then the VSC and ABS lights, then the...
Replaced the alternator hoping to remedy intermittent charging issues. The one installed was an AC Delco and the nut securing the B+ lead was was barely tight and the connection was dry as a bone (no grease). Lots of corrosion and looks to be some arcing on the post. Hopefully this Denso reman...
Looks great! I like how tight yours sit to the body. I ended up using the same method on the AHC pump. Success! Mine are the reduced angle WKO sliders.
Following along here as I'm in the same boat. Ordered non-AHC sliders and need to remove AHC components. I've been slowly plugging away at it, but the bolts on top of the frame rails are a PITA. I might give it another go this weekend if I have time.
Sounds like you're planning on replacing with OEM parts, and already have them, but I replaced my socket with a USB/USB-C charger. More useful in my application.
Here are where my adjustment bolts are set. Thanks for the info. Will review the video you posted when I get back home.
Driver's side rear, then front:
Passenger side rear, then front:
I replaced my OEM with Trail Tailor UCA's and have been very pleased with the result. Really tightened up my front end. I could only manage around 1° caster with the factory control arms and lift. With the Trail Tailors I ended up with 2.4°. While not a huge increase (certainly not the 4°...
My AHC has been deleted and I have just started removing all of the frame mounted components in preparation for sliders. Reading this thread with interest in any tips/tricks. The 12mm bolts have all been coming out pretty easily but accessibility to the bolts on top of the frame is proving a...
Thanks. These are the Dura EZ material. They fit and breathe well so far, but we're just getting into spring time here in PA, so I'll have to wait and see what the summer brings. All in all, very pleased with these seat covers.