Same size setup here but with the Slee spacers. I bought the spacers with the plan to change the stock wheels to the TRDs which would require spacers to fit the center caps. Wound up refinishing the stock wheels and using the spacers anyway. Very please with the ride and look.
Short answer is: Yes.
Minimal rubbing during low speed 3/4 steering lock. Corner of tire rubs the lower aft part of the plastic wheel liner intermittently.
I suspect the issue is not the tire size but the tire size+spacer (as others have mentioned). Tires and spacers were installed together...
Dropped the truck off at the tire shop in the morning. Wheels were removed & sent to Powder Coat shop. Wheels sent back to tire shop the following morning where new tires where installed. Picked up truck 36 hours after I dropped it off with everything handled by the guys at Tirelink.
I used a powder coating facility that was recommended by my tire shop. Very please with the results but the cost was $150/wheel (I did all 5 wheels) so not a cheap option.
*Update on rubbing*
I have heard/felt some very minor rubbing when turning at full lock on slow-speed off-camber turns. I have been unable see where the rubbing is yet since no markings are left behind. I suspect the added 1.25" spacers may the reason. I wanted to get this out there in case...
I was contemplating back and forth between the Defender M&S and the A/T2 but ultimately went with the slightly more aggressive A/T2. My off-road needs are minimal and either choice would have been capable. It came down to aesthetics; I didn't want it to look like an accountant's truck even if...
Thanks for compliment. The wheels were professionally sandblasted and powder coated by a shop on the north side of Houston at $160/wheel x 5 wheels. Not cheap but they duplicated the OEM shade of silver very well.
I have just installed this setup (275/70/R18 & 1.25" Spacers) on an '07 LX470 w/AHC with no rubbing to date. I have not tested it at full lock and/or maximum suspension travel but under normal driving conditions for the past 4 days since installed it has not rubbed.