Great info and thank you for the part numbers.
I found a new complete OEM pump at https://www.carpartsdirect.asia/
If you have a daily driver like me and cannot wait until you have time to rebuild your old one. $181 bucks
I been trying to get it to crank for the last 2 months, when it was idling and then died.
Have not been able to get it to crank since. Put new starter, check every possible cable, fuel relay, battery, etc. everything seems to get power, relays clicking and such.
Now that Whitey45 mention if I’d...
Well, now that you mention it, I tried to turn it and I cannot do it, even with a long bar…..Engine has oil, changed the water pump not to long ago.
So looks like the engine is frozen.
Going to have to open it up.
Have a 4bt cummins with all the adapters, seriously thinking on doing the swap...
It never starter back after it died that first time.
Just that weird click sound that you hear in the video.
Thanks for all the help. I’ll keep trying.
Stored in garage, The starter wants to crank but just a big “Click”. I cannot fine the famous starter relay just an aftermarket solenoid on the firewall with both wires going to the starter.
What throws me off is that it was running and then suddenly died, and from there just the big “Click”...
I’been looking for it, the original one that is.
I believe they removed it and installed the one circled in red in the pictured below.
Changed it for a new one, still nothing!
Red and black wire going straight to starter, the smaller gauge black wire goes inside the fire well….. I will trace...
Hello, I have a big problem with my HJ47 2h engine Frankenstein. And I need you help.
Engine never gave me any problems, although I do not use it often.
Started normal to warm it up, after about 20 min running and it died.! Tried to started again and “nothing” just a big click, like a bad...
I have an HJ47 with a 2H engine 4speed tranny and it has the split transfercase.
Nevar saw a 5 speed with the one piece transfercase like this one. I thought the 2H used the same transmission the 3B has. They look identical even the support underneath where it seats on the crossmember.
Thanks for the input guys, I do not know what type of engine it had.
Check the input shaft of My diesel tranny and you guys are absolutely right! Different splines.
No bueno for my application.
Cheers!!!
Thanks, I have an HJ47 4 speed but it has the split case.
I do not know if is worth the swap (5 speed old type transfer case vs 4 speed split transfer case).
Hello, came across with this Toyota Dyna
H50 tranny with what it looks like an identical FJ pre 1979 transfercase attached to it!!!!
Before trying to buy it I would like to ask if this set up will accept my 3B engine? Meaning using my bell housing, clutch, etc.
I thought about it being a 5...
Thanks, 3 items I need to be 12v on the engine
Fuel pump solenoid, alternator and starter.
I do not know if the 12v alternator can charge the two12v batteries.
As far as the starter it is a GM to Cummins starter and it is 12v also.
Hello, I need your advice on how to approach this.
My BJ41 JDM 2B engine is getting tired and I have a 4bta sitting in my garage with an Nv4500 tranny.
The hole system in the rig is 24volt. So the question is how can I keep the cummins 12volts and the rest of the BJ 24volt?
Your input is...
Hello, question to the experts.
Notice oil around one of the ports on the exaust manifold, is it a valve? or something else?
Also a few blue smoke when switching gears. Could this be for the same problem?
Thanks in advance.
Pictures attached.
I have a Nissan alternator from a diesel LD28 engine and I am going to try to adapt it to my 4BT, how did you adapt the pulley on yours to take the cummins serpentine belt?. Thanks.
Apologies if this question has been asked already.
Is it possible to install a 4BT cummins engine to a stock 4 speed FJ40 Transmission? or the only option is a NV4500 tranny?
I would like to keep it as stock as possible and with the less mods.
I have a 4" lift on my rig, if I install the 4Bt do...