drw hubs on a srw axle retaining the srw shafts and you will be @ 61". inorder yo get proper alingment you will need to use both stock shafts put the lung tube on the short side and the short tube on the long side. pm me for more info as I build thes axles on a regular basis and machine hubs for...
good to see josh is remembered. never meet him in person. conversated online. i feel as though i truley knew him. his death touched me. will always remain in my sig line.
I have been running stock 4 core radiator(new from radiator barn)
and the stock fan and clutch for several years here in Fla during 100 deg ambient temps. never had a problem. and never gets over 200 deg.
It also depends on the motor mine is a stock 93 tbi 350.
chocco is a bad ass park. been 3 time last year there is a lot i couldn't do. been rebuilding the rig science the last trip. boat ramp and hell revenge were my favorites next was the mini rubicon. hell impossible was a blast also.
even the hospital was a nice place. spent a day there after a...
mine stays in the 180 220 ball park all the time.
new 4 core cruiser radiator, stock fan and a good shroud
summit temp gauge and a cap gauge from summit.
that is where mine is currently bent. I built mine that way the first time. It worked well till i bent it. then second time i made the top bar straight and it seems to work better.
after the cut of my frame shown in the pic above. I should have done a angle cut. unless the frame has no taper. then step cut. be sure not to leave any points in your fish plate in order to relieve the stress on the corners.(not sure why but a buddy who is an auto engineer told me so). good...
looks good for now. personally i would move them back about .5 to 1 inch. as you add weight they will settle then be to steep. defiantly don't final weld till you have the rig loaded. And be shure to flip and redrill that military wrap. It needs to be at the fixed end.
give me the id of the tube you are trying to adapt to and i will see what i can do.
all pipe is id dimension . all tube is a od dimension. the jeep dl is 1.25 tubing and the pipe is probably a 1.5 id. so find a piece of 1.5 x 120 wall tubing and you should be in businesses.