Search results for query: *

Forum search Google search

  1. Acadia

    Who has an OME lift on their 3rd Gen 4runner?

    I am running the OME 2.5 lift on my 2000 4rnr. No mods needed just install and go. handling is 100% better than stock, although it does ride a little rougher!
  2. Acadia

    Help With New Front Bumper

    modification for ARB bumper Basically cutting off the two flat mounting plates on the front of the frame that your original bumper mounts to. This lets the ARB bumper mount slip over the frame rails and mount up using existing holes in the frame. really not a big deal so don't let it scare...
  3. Acadia

    Removing the rear tail-light lens, 02 4-runner

    iirc, pull towards the side of the truck and not straight back
  4. Acadia

    ARB on the 4runner

    Duane-I appreciate the kind comments :) and Yes the ARB bumper is a BIG upgrade in front end protection plus they look cool as well :grinpimp:
  5. Acadia

    ARB on the 4runner

    gogle-looks pretty sharp
  6. Acadia

    ARB on the 4runner

    tractor supply (TSC) iirc they are rated at 8,000 lbs
  7. Acadia

    ARB on the 4runner

    i cut the factory connector off and then used new connectors on the ARB signals and the factory wires. nothing fancy!
  8. Acadia

    ARB on the 4runner

    i like my 255-85-16's as well and i haven't regeared either. it is fine for cruising on the hwy but i think it will be a problem on the trail. gogle - where are the pics?
  9. Acadia

    ARB on the 4runner

    i wouldn't think so but i am not an expert on front end geometry :p
  10. Acadia

    ARB on the 4runner

    i left them finger tight until i had the bumper on the brackets, then i snugged them down. then i adjusted the bumper where i wanted it and went back and torqued everything down tight.
  11. Acadia

    ARB on the 4runner

    congrats!! post up pics when you are done :) x2 on the jackstands if you don't have a helper!
  12. Acadia

    ARB on the 4runner

    you use the two existing tow hook bolt holes on each side and then you need to drill one additional hole towards the end of each frame rail.
  13. Acadia

    ARB on the 4runner

    it would have to face the roller fairlead
  14. Acadia

    ARB on the 4runner

    if memory serves me correctly the whole bumper is 3/16 with an additonal 3/16 re-inforcing plate in the winch area.
  15. Acadia

    ARB on the 4runner

    the slight mod would be cutting off the factory bumper mount. here is a link to some pictures of another 4runner arb install on Yotatech ARB on!!!pics! - YotaTech Forums there is alot more info over on yotatech about the 4runners and it might be worth your time looking around their before...
  16. Acadia

    Who has the most miles??? Post them up boys!

    00' 4runner barely broke in with 157k on the clock
  17. Acadia

    ARB on the 4runner

    I don't know for sure but I would guess somewhere around 70-80lbs because I didn't have any issues moving it around by myself.
  18. Acadia

    ARB on the 4runner

    pm'd ya here is the part number for everyone else. #3423020 the bumper is listed for the 95-04 tacoma but it will fit the 4runner with a slight mod. you have to cut off the stock bumper mounting flange. there are some pretty good write ups on this install over on yotatech.
  19. Acadia

    ARB on the 4runner

    thanks! approx. 2" in front and 2.5" in the rear
  20. Acadia

    98 4 Runner engine light

    what are you adjusting on the throttle position sensor (TPS)?
Back
Top Bottom