Search results for query: *

Forum search Google search

  1. mklemp

    Starter Screech

    The starter and mounting surfaces are clean and flat. The teeth on the flexplate look new. I'm going to see if I can get a camera into the bell housing access port. I should also check the runout in the flexplate for giggles.
  2. mklemp

    Starter Screech

    The AC control is off. The system is not charged hence the pressure switch would not engage the compressor. Confirmed that the AC compressor pulley is free spinning and noise free when the engine runs. This noise is specifically when the starter is engaging/disengaging. Noise goes away when...
  3. mklemp

    Starter Screech

    These are all Autozone starters and not OEM. The current and last starter is brand new High Output 2.2KW Everything was torqued to spec with a digital torque wrench per the installation instructions below. No mention of a green bolt. The orientation of the flex plate is correct and I did...
  4. mklemp

    Starter Screech

    It's a new engine rebuild with a new AC compressor and Alternator. The AC isn't charged yet. The whining noise after the start is the Power Steering that needs to be bled. The actual start process is pretty rough sounding with a zing at the end of each starter disengagement.
  5. mklemp

    Starter Screech

    All four starters made similar noise including the original. I was fighting the intermittant click no start problem and worked through it. The noise was a secondary issue. Now I'm focused on resolving the grinding noise.
  6. mklemp

    Starter Screech

    I recently rebuilt the 1FZFE engine in my LC and had this starter screech both before and after the rebuild. The vehicle sat for a year before I pulled the engine and assumed that a new starter would correct the issue. I replaced the original with two reman starters and more recently a brand...
Back
Top Bottom