Some clips cannot be bought separately and only come with the harness. Some are indeed available separately. Do you have a picture of the said clip?
Here are some that are available for the later FZJ80:
Here are all of the clamps/clips available for a 100 series... A lot depends on...
90980-11332: gray, 10 pin, 1 unused:
90980-11400: black, 1 wire
That's all I currently have. Some of these don't have functional correlatives mainly because my 80 is dead and the harness is long gone as well as the connections. So, please feel free to correct or add to this thread as...
90980-11150: black, 4 wire, for the dizzy assy:
90980-11024: gray, 5 pin, for the ignitor:
90980-11009: gray, 2 pin: for the brake master level sensor in the cap
90980-11008: gray, 2 pin, brake master side of the above:
90980-11025/11401: white, 2 pin:
90980-10944: big, gray, 3 pin, 2 unused (at the alt, with bracket):
90980-10841: gray, 3 pin (alt side):
90980-11317: black, 5 wire, for the MAF:
90980-11153: gray and brown, 2 wire, for the injectors. When you buy replacements, they only come gray:
90980-11246: Gray, 2...
90980-10711: black, 4 pin. For the Throttle position sensor:
90980-10942: gray, 4 wire: for the emission valve set under the intake clamshell:
90980-11428: gray, 1 pin. This is for one of the sensors that run along the LH side of the head at the front. Just can't remember which...
These two are useful if you are trying to connect universal O2's to the factory harness.
90980-11028: gray, 4 pin w/clip: For Bank 1 Sensor 1 O2:
90980-10869: gray, 4 pin w/clip. For Bank 1 Sensor 1 O2:
While not a part of the main engine wiring harness, you will need these...
90980-11087: gray w/foam protective surround, 12 wire, 1 unused cavity (this is one of the transmission wires for the A343F found on the LH (driver's side) of the block down by the starter assy:
90980-11203: white, 17 wire, 3 unused cavities:
90980-11390: For the Engine ECU in the...
So for the oil pressure sender unit found on the RH side (passenger side) of the engine you have the following connectors:
90980-11016: gray, triangle housing, 3 wire
90980-11271: gray, circle housing, 1 wire.
The ground and power "slide" style connectors are not available separately...
Electronics/Gadgets: 80 series engine electrical harness information
The following posts are to document the 1FZ-FE US market 80 series 1995-1997 OBD2 main engine wiring harness connectors. While this is not exhaustive in the sense that it covers every single connector, it does cover about 95% of them. The remaining 5% or so are not sourceable outside of the...