Search results for query: *

Forum search Google search

  1. D

    A/C Lines - Missing Spring Dowel Pins?

    Hey Everyone, A few weeks ago I took my A/C system apart as it was completely empty. I replaced all seals and was just putting it back together as I noticed that all pipes have a hole for a spring dowel pin (if this is even the correct word - sorry I'm no native speaker), but only a few...
  2. D

    Play in seat

    Had a similar issue. Turned out to be something different, though. For further reference: Front Seat Jiggle / Clunk - https://forum.ih8mud.com/threads/front-seat-jiggle-clunk.263344/post-15161283
  3. D

    I'm at my wit's end...power seat is loosey goosey

    Had a similar issue. Turned out to be something different, though. For further reference: Front Seat Jiggle / Clunk - https://forum.ih8mud.com/threads/front-seat-jiggle-clunk.263344/post-15161283
  4. D

    Front Seat Jiggle / Clunk

    I just had this problem and got it fixed. Inside the two white worm drive housings (one is attached to the motor) there seemed to be some sort of rubber washer. Those washers had deteriorated to a gooey substance in all four housings. One seat was not moving at all anymore as the whole gear was...
  5. D

    1996 HDJ80 - ECU ,Immobilizer (89780-60050)

    Found the probable manuals for the Meta System here: HPA / Alarms / Manuals / Vehicles Area / Tech Area / MSYIT / Root folder - Welcome to Meta System - https://support.metasystem.it/index.php/msy_ita_en/content/view/full/64436 Still begs the question what this mysterious Toyota ECU is for and...
  6. D

    1996 HDJ80 - ECU ,Immobilizer (89780-60050)

    Hey everyone, I have bought another HDJ80 a while ago and am now in the process of getting her ready for a trip. Doing so I found an ECU Immobilizer (89780-60050, 627435-000, IMS-05A) above the gas pedal whichs plug is disconnected. Does anyone know what this does and how it can be...
  7. D

    Airtec TJM snorkel

    Hey everyone, I got myself one of those TJM knock-offs. Looks exactly like the TJM Airtec (011SAT0080A). Snorkel - Equipaddict - New Version - https://www.euro4x4parts.com/en/parts/ref=FSE1108/snorkel-equipaddict-new-version/oe=ts80 However, I don't get how I would fit it to the air box. It...
  8. D

    Steering gear box rebuild

    Sorry for the late reply. That is the same bearing I got. However, my box is still not back together as I ended up buying a second 80 Series in better condition. Either way: I measured every part I took out. That one is 19x35x7. NSK 1935W05A should fit too.
  9. D

    Effects on plugging an unused coolant outlet vs looping.

    Update: I ended up looping the top hose behind the fuel lines directly to the lower barb which was halfway accessible with the oil filter removed.
  10. D

    Effects on plugging an unused coolant outlet vs looping.

    As my ACSD fell apart with a loud clunk whilst driving, I'm am just wondering the same. I'm leaning towards looping, but am not quite sure and haven't decided yet. Diesel Power Systems offers the following kit which contains block off caps. Source: Facebook
  11. D

    1HD-FT - Injection Pump Bearing Loose Outer Race

    I ended up gluing it in. Hopefully I won't have to figure out that a torch is not gonna cut any time soon :D I'd still appreciate your input on this matter, though. Cheers, Mark
  12. D

    1HD-FT - Injection Pump Bearing Loose Outer Race

    Hey everyone, I'm currently putting back together my timing gears. Upon checking how the new injection pump bearing will fit the aluminium housing I noticed that it falls straight into the bore and that the outer race can be spun by hand. Is this by design and somehow tightens when getting hot...
  13. D

    Steering gear box rebuild

    Great to hear that I have been able to finally give back something to this incredible community. It has given me so much over the years and saved me countless bucks :) However, again a question, haha :D Does anyone know a part number for the Teflon seal within the detachable outer valve body...
  14. D

    Steering gear box rebuild

    Great to hear, mate :) Took me quite a while to find these numbers and I also bought them on a whiff only. Which ones did you end up using? As mentioned earlier the 90562-33008 feel rather rough compared to 90560-33003. I am going with 90560-33003 as soon as time allows... So far I have only put...
  15. D

    Steering gear box rebuild

    My best bet so far is 90560-33003 or 90562-33008. They are the same size as the original and should fit from what I can see. However, the material is different. 90560-33003 has a smooth finish and 90562-33008 seems rather rough. Both are black, but that shouldn't matter as long as they seal...
  16. D

    Alternator - Stator - How Much Resistance between Individual Wirings Is Acceptable

    Hey everyone, I have a Denso 101211-5261 (removed from an HDJ80) apart and have removed the stator for a complete rebuild. I know, that I could simply replace the stator for like 30 bucks, but I'm trying to learn something, too^^ Having desoldered all connectors down to the individual stator...
  17. D

    Steering gear box rebuild

    Some way back in this thread @NeverGiveUpYota had a diagram of a 60 series steering gearbox (Post #128). After some searching I came up with 9056248001. However, does anybody know if the input shafts are the same size between 60 and 80 series Cruisers? Edit: Input Shaft Bearing (NSK 19BSW05A...
  18. D

    Steering gear box rebuild

    Just in case I break them somehow: Would you have the part numbers? I can't seem to find them in my HDJ80 diagrams. Only the ones in the kit.
  19. D

    Steering gear box rebuild

    Hey mate, juzt about to do mine and had a look at all the available kits at Rockauto. However, none of the images show the four teflon rings that sit on the input shaft. Do you remember which kit you bought? Also later in this thread someone mentions that a "kit from Rockauto" didn't contain...
  20. D

    1HD-FT Oil Pump Play

    Cheers, mate. Was hoping to hear that^^ Another thing: Is it worth to remove the timing gear housing to replace the gasket behind it? (Part number: 1519317010) As I have resealed the oil pan a few months ago, I'd like to avoid doing it again. Maybe it's even possible to remove the housing...
Back
Top Bottom