I enjoy it. I drive in high around town but on any lengthy trip I'll keep it in normal. The ride is pretty rough in high even with re-indexed TB's. I AM glad that I did it. I am also glad I can still lower it to normal mainly due to parking garages. I had a lifted FJ at one point and I could...
I am asking for a friend with a 2012 KDSS equipped trail edition. Is this a 3 inch package? Any reason it will not work with KDSS?
I'm in a 100 so I apologize for the "basic" questions.
Thanks
I used Home | United Radio to fix the radio. I had the same issue so I detached the small single DIN unit below the Nav screen, sent it to united radio out of NY. they diagnosed it, called me with a price/approval to fix and sent it back.
You will have wires going from the vehicle harness to the height control unit (plug). When you cut these wires in order to splice in the override you will have a vehicle side of the cut wire and a height control unit plug side to the cut wire. I no longer have it but I sketched out the...
prior to soldering the connection and heat shrinking I tested the power as seen below.
I ran the unit and wires under the steering column
Switch LED at night. A little bright......
I am not an electrician and I do not claim to be one but this may help someone. I also do not claim that this is the correct way but it has worked for me.
I could not find some answers to questions I had around the install of the AHC override so I decided to try and document my process.
Unplug...
I've run into the same issue through the search tool. I had the trim plate off today but would prefer to have a game plan on the 12v prior to cutting wire. Any help is greatly appreciated!
I had a slight issue after my commercial bar install with the ahc dropping in the front after putting in high. The resolution was a simple AHC flush. Have you check your fluids?
Lift options are limited if you wish to retain the ahc. Check out the Slee override switch. It allows you to keep the...