Search results for query: *

Forum search Google search

  1. DHwreckage

    I need help installing child car seats in a JDM 1994 80 series

    I just use the seat belt to hold my daughters car seat, most car seats have 3 ways to connect: 3-point or 2-point seats belts and the hooks....,but our cars definitely don't have the special car seat hooks!
  2. DHwreckage

    LX450 Trim Panel Delete Solution

    Tires are the worst offenders! My cladding is all gone and I miss it! I just need to sack up and jb weld/pop rivet/metal tape the holes and monstaline where the cladding went!
  3. DHwreckage

    What Did You Do with Your 80 This Weekend?

    finally fixed my CDL, when I went and tuned up my cruiser this year after it had been sitting neglected for way too long I found my CDL no longer engaged. Tried the shift to Low drive forward shift to High drive backwards and vice versus but no luck. After pulling the wrong sensors the first 2...
  4. DHwreckage

    Bolt on turbo kit

    do any boosted peeps in here have experience with the Innovate PSB-1 Wideband/boost gauge? since the AEM Failsafe is discontinued this seems like the better of 3 wideband/boost all in one gauges...but I hear not great things about innovate AFR gauges. On top of that in a few videos on YouTube...
  5. DHwreckage

    Cargo Accessory Mounting Panel

    reread post #23. the scan would be of the quarter panel cubby in the 80 and could be used to test interference of the mounting panel if the user made changes. This discussion is going no where so lets just agree to disagree and move on, :cheers:.
  6. DHwreckage

    Cargo Accessory Mounting Panel

    correct sharing a working 3D drawing people can send out to get fabricated or...or....oooooorrrrrr hang with me here... people could even modify it to suit their needs and then send it out to get fabricated! I'm not telling CJK to go spend money to get a 3D scan but there are some mudders with...
  7. DHwreckage

    Land Cruiser 80 Series 3D Scans

    hey @The299 , when you get some free time would you be able to scan the rear passenger quarter panel? thinking about an open source drawing for quarter panel storage on thingverse and thought it would be cool to have a 3D scan people can readily access if they wanted to tweak the drawing to suit...
  8. DHwreckage

    Cargo Accessory Mounting Panel

    for a one off part that will never change in design then sure, but we are talking about a base design that people can then modify to suit their needs. Its super simple to make modifications in fusion or w/e you use and then check for interference with the scan vs going out and measuring after...
  9. DHwreckage

    Cargo Accessory Mounting Panel

    3D scans "weren't" common to reverse engineering, you can sure as s*** bet they are now and make designing and optimizing parts much faster! Also for reference there are dimensions on "he who shall not be named's" website: if the part was in CAD and there was a 3D scan of the QP changing the...
  10. DHwreckage

    Cargo Accessory Mounting Panel

    I think if someone 3D scanned it, we could probably create a pretty simple base panel that people could use as a starting point!
  11. DHwreckage

    Cargo Accessory Mounting Panel

    @LandCruisinMy93 made a pretty slick quarter panel for his rig here, might try and reach out to him? there was also a thread about getting 3D scans of different parts of the 80 series which may be an option so get something mocked up!
  12. DHwreckage

    Correct Function of Fuel Pump Relay Signal?

    do you have a wideband installed and how lean are you/when are you lean (closed loop or open loop)? In closed loop the ECU wants the motor to be at 14.7 which would be lean for forced induction but the S/C was designed so you shouldn't really be boosting until open loop which is generally rich...
  13. DHwreckage

    What did you get your 80 for Christmas?

    I may have gone a bit overboard and also picked up an HD Auto Basic Turbo kit from Australia.....When I saw the exchange rate I couldn't not pull the trigger!
  14. DHwreckage

    Turbo j-pipe interest??

    Id be interested, given its got the same layout as the HD Auto J-Pipe. I have one of their basic kits coming so I'm piecing together a few odds and ends to finish it up. I'm sure the HD auto J-pipe will hold up fine but the welds and joints leave a bit to be desired from their photos!
  15. DHwreckage

    Dobinson 3.5" VT springs

    No doubt they were and still are decent springs but they are old single rates and the ome shock definitely don't help! Hoping to drop a little height and gain some travel and comfort from the new set up!
  16. DHwreckage

    Dobinson 3.5" VT springs

    yea this thread gives me hope, I picked up the 2.5" version that should be here this weekend with IMS shocks. Hoping it will be a big upgrade from the old slee lift i have now with ome shocks, and hoping i dont run into alot of the issues ive read about with the original tapered version. I would...
  17. DHwreckage

    HD automotive turbo kit

    There is quite a bit of info on the pulsar, tons have been using the turbo in Australia with no issues, per the pinned post in the 1FZ-FE turbo Land Cruiser grp on Facebook, with the 3582 you are looking at boost coming on at 1800rom and full boost around the mid 2k range. i also totally forgot...
  18. DHwreckage

    What did you get your 80 for Christmas?

    I picked up some Dobinson 2.5VT coils with IMS shocks with F/R timbrens....eeek
  19. DHwreckage

    Bolt on turbo kit

    there are a ton running the HD kit, they just aren't on Mud! The turbo'd 80 series grp on Facebook is full of em!
  20. DHwreckage

    Bolt on turbo kit

    It will be nice to have a land cruiser shop nearby again since Robbie (PowderPig) left boulder, looking forward to your thread!
Back
Top Bottom