Search results for query: *

Forum search Google search

  1. Mustangstolli

    1980 Bj40 clutch fan conversion

    Hopefully someone’s been down this path before and can shed some light. I have a mechanical fan that is a direct bolt on to my 13b diesel motor. Fan shroud is approx 200mm deep. In the future I’m looking to replace the water pump to suit a viscous fan hub. I think the viscous hub is approx...
  2. Mustangstolli

    Oil Pressure switch and sender - 13b diesel

    Hi All, I have completed a B diesel to 13B diesel conversion on a 3/80 Bj40. I am now sorting the factory gauges so that they work properly. My question is this - where on the 13b should i mount the pressure sender and pressure switch? I have 4 or 5 blanked off ports running front to back of the...
  3. Mustangstolli

    oil switch and oil pressure sender advice

    Hi All, I have completed a B diesel to 13B diesel conversion on a 3/80 Bj40. I am now sorting the factory gauges so that they work properly. My question is this - where on the 13b should i mount the pressure sender and pressure switch? I have 4 or 5 blanked off ports running front to back of the...
  4. Mustangstolli

    Best engine run-in procedure

    Hi all I have just finished an engine rebuild on a Toyota 13b diesel. I have turned the engine over and fired it up for a couple of minutes to make sure I don't have any oil/water leaks. I do not have the electric fan installed yet (but can install if required). What is the best run in procedure...
  5. Mustangstolli

    13b diesel lifter bore issues - engineering assistance required!

    Hi all I have been trying to get my 13b diesel rebuilt for the last 6 months with drama after drama. Preparing for a trip to cape York (northern most tip of oz) in August this year - so pulled the 13b diesel out for a rebuild in sept/ oct last year. A diesel mechanic is doing the rebuild after...
  6. Mustangstolli

    Factory lockers in 2hi and 4 hi?

    Hi all I have an Aussie spec 2005 hzj105 standard. This means it is 1hz diesel powered, solid axle front and has the part time/manually select 2hi-4hi-n-4lo transfer with manual locking hubs. Mine also has front and rear factory diff locks. Seeing as it is similar to an 80 series operation I...
  7. Mustangstolli

    Factory diff lock engagement in 2wd and hi4 questions.

    Hi all, I have an Aussie spec 2005 hzj105 standard. This means it is 1hz diesel powered, solid axle front and has the part time/manually select 2hi-4hi-n-4lo transfer with manual locking hubs. Mine also has front and rear factory diff locks. I've just been thru the forums figuring out why I...
  8. Mustangstolli

    Toyota 3b vs 13b block

    Hi I know the 3b is an indirect injected motor and the 13b is a direct injected motor, but are the blocks identical/interchangeable? Thanks
  9. Mustangstolli

    Cam journal advice needed - 13b diesel

    Hi all Posted in the diesel tech section but it seems they are having fun off roading at the moment:-) I am in the process of freshening up my 13b diesel and need some advice on my camshaft. Reading the fsm: It says to measure cam journals, and gives a spec. My journals are 0.019mm under spec...
  10. Mustangstolli

    Toyota 13b cam journal specs - what to do? Advice needed

    Hi All, I am getting my Toyota 13b diesel engine freshened up as it lost compression in cyl 2 due to broken rings. At the moment it looks like my crank is 0.01mm under the lowest tolerance, so I am getting it ground to 0.25mm undersize which is the next size bearing. My cam journals are...
  11. Mustangstolli

    Factory brochure required

    Hi all I just found out new bull bar regulations have been brought out in NSW, Australia which basically say if you live in the city you need to justify having a bull bar, otherwise you can't have one. My engineer is going to email me the relative standard so I can pick it to pieces. As I need...
  12. Mustangstolli

    Power steering box question

    Hi I am doing a 60 series power steering conversion on my bj40. I have an Australian 60 series box and want to run a kit through it but don't know what year 60 it's out of. I think they changed around 1984... How can I tell if I have a pre or post 84 model box?
  13. Mustangstolli

    Power steering box rebuild

    Hi I had a look through FAQ and did a bit of a search but didn't find a thread/step by step power steering box rebuild. Can someone point me in the right direction? Thanks
  14. Mustangstolli

    80 series power steering with front spring flip/75 series leafs

    Hi I am trying to convert my bj40 to power steering using an 80 series box. I have 75 series front springs in the front which has moved my axle 50mm forward. The problem I have is the 80 series box has a protrusion in the housing near the input shaft. This means my shock tower is not far enough...
  15. Mustangstolli

    Factory tailgate latches

    Hi all I have just bought a fibreglass tailgate which has what looks like factory latches in the tailgate, but unfortunately the seller does not have the "hook" part which bolts to the tub. Just wondering if anyone has any photos of this so I can fabricate some or if anyone sells any ?
  16. Mustangstolli

    Front/rear diff centre

    Hi all I have a spare rear diff that I am converting to disc brakes and I'm going to install a Detroit locker in the centre. When I swap out the existing rear diff, can I use that rear centre in the front diff? I have an air locker to go in the front and it'd be easier to set up the locker in...
  17. Mustangstolli

    Photos please

    Hi all This may seem like a bit of a strange question/request: Did a 1980 bj40 have rear mud flaps from factory? If so, does any one have any photos? In order to engineer my bj40, one of the things it needs to have is rear mud flaps, the width of the tyre and a maximum of 300 mm from the ground...
  18. Mustangstolli

    Toyota 13b diesel help

    Hi all I'm looking at turbo charging my 13b diesel and need to tap into an oil feed for the turbo. I've bought a used turbo-glide manifold and turbo. Can someone please confirm if the smaller dia meter oil line (in a bend) going from oil cooler/filter housing to vacuum pump is the pressure line...
  19. Mustangstolli

    Shock advice required

    Hi all, I've just recently installed. 75 series front leaf springs on my bj40, which moved the front diff forward 50mm (SUA). I'm preparing to do a 60 series power steering conversion and have obtained some ford shock towers: I have several questions: This is a pin type shock tower as opposed...
  20. Mustangstolli

    Power steering conversion - advice needed

    I am about to do a power steering conversion on my Australian bj40. I am running a 13b diesel which has the "built in" power steering pump, gear driven from timing gears. My question is mainly about the steering box. I have a 60 series box and pitman arm I bought for the conversion, however I...
Back
Top Bottom