Search results for query: *

Forum search Google search

  1. tucken72

    For Sale  Flagstaff, AZ, Delta Vehicle Systems Bump Stop Holders

    These are lightly used bump stop holders from Delta Vehicle Systems. These are the model with a 1" spacer built in. The included instructions are for the 1/4" spacer version but the install is similar. Hardware is included. Asking $300 plus shipping.
  2. tucken72

    8x Series V8 Swaps

    @Spaggyroe , no problem. . I had some extra dash bulbs so I did a quick test. It draws about 133 mA so well under the output rating of the GSS-3000.
  3. tucken72

    8x Series V8 Swaps

    @Spaggyroe , the GSS-3000 is powering the incandescent bulbs on my dash. The Dakota Digital outputs are rated for .2 amp which is plenty for the tiny incandescent bulbs. Been running it for several months now with no issues. I was impressed out how easy the GSS-3000 was to setup for the...
  4. tucken72

    8x Series V8 Swaps

    Eventually I might do a build thread but I installed a 6.2L, 6L80E from a 2014 Camaro into my 1996 LX450. It runs great and is a blast to drive. An important part of getting this project finalized is the tuning. I asked permission to post here but I used Justin Carpenter at JTCtuning in Texas...
  5. tucken72

    Custom 3d Printed Overhead Consoles for 80 Series

    PM sent. Thanks
  6. tucken72

    SOLD Flagstaff, AZ Wits End Turbo with additions

    Pending Sale.
  7. tucken72

    SOLD  Flagstaff, AZ Wits End Turbo with additions

    I am selling my lightly used turbo kit that I put about 4000 miles on over 2 years. I had the system running at 8 psi max boost and it performed great. The kit is the Wits End turbo system with some additions, intercooler with piping and Blow off valve, upgrade MAF, modified air cleaner, AFR...
  8. tucken72

    Tuffy center console switch installation pics

    I realize this doesn't answer your original question but here is another option out there. https://absolute-wits-end.com/late-80-series-useless-ashtray-switchplate-toyota-switches/
  9. tucken72

    Aftermarket Keyless/alarm pnp adapter

    I bought this adapter at the end of Dec 22 and it worked perfect in my 96 LX450. I installed a basic keyless entry system made by Avital. Thanks for making this product available to us Bryan.
  10. tucken72

    SOLD Flagstaff, AZ, 1FZFE Manual Transmission ECU and LHD clutch pedal

    The 1FZFE OBDII manual transmission ECU is still available. Asking $1000 obo
  11. tucken72

    SOLD  Flagstaff, AZ NV4500 to HF2A Transfer case adapter plate with hardware

    This adapter plate came from Northwest Adventure Vehicles and is the exact one that they sell for adapting a NV4500 to the Toyota HF2A transfer case. It comes with the seal, dowels, gasket, and bolts. Asking for $300 shipped.
  12. tucken72

    SOLD Flagstaff, AZ, 1FZFE Manual Transmission ECU and LHD clutch pedal

  13. tucken72

    SOLD  Flagstaff, AZ, 1FZFE Manual Transmission ECU and LHD clutch pedal

    I am selling a few things for a manual conversion. One item is the extremely hard to find manual transmission 1FZFE OBDII ECU that is required for those doing manual swaps on their 80 series. I bought this for $1200 with the intent to do my own swap but decided not to. I did hook it up in my...
  14. tucken72

    1FZ Crankshaft repair sleeve (RMS side), does anyone have a source?

    Sorry I don't know of a sleeve that will work but I am guessing you need one because a groove has been worn into your crank and new seals aren't sealing properly. If yes, I had a similar issue with a 5VZ engine. I drove the new rear main seal about .050" further than the factory location so...
  15. tucken72

    SOLD Flagstaff, AZ, 1996 Front and Rear Axle Shafts

    PM sent
  16. tucken72

    SOLD Flagstaff, AZ, 1996 Front and Rear Axle Shafts

    By inner bearing...do mean the oil seals? If yes, there is some grooving in the oil seal area. These axles had just shy of 200k miles on them. If I were to run these I would overdrive the seals so they are wiping on virgin seal area. Wits End has a nice tool for overdriving the front axle seals.
  17. tucken72

    SOLD Flagstaff, AZ, 1996 Front and Rear Axle Shafts

    Yes that is correct. The drive flange increased in length (thickness) when the shaft length increased.
  18. tucken72

    SOLD  Flagstaff, AZ, 1996 Front and Rear Axle Shafts

    These axle shafts were my trail spares for my 1996 LX450. These will fit 80 series Toyota Land Cruisers and Lexus LX450s except semi-float rear axles. The rears I am selling are from a 1996 non-locked full floater rear axle. The passenger side shaft will work on factory locked or non-locked rear...
  19. tucken72

    For Sale 6bt Conversion Kit, 80 Series

    Hi there, I sent a PM a couple days ago. Is this still for sale?
  20. tucken72

    Delta Shifter Console and Tuffy Console hybrid

    Sorry about the photo quality but here is a photo with the camera up by my eyes to help show what I see when driving. I hope this helps.
Back
Top Bottom