Search results for query: *

  • Users: H2o
  • Order by date

Forum search Google search

  1. H2o

    Issues with 1993 pickup master cylinder

    So I recently installed a 1993 pickup MC on my FJ40. For some reason, the rear seams to be locking up too fast since the swap. Since both the fj40 OEM MC and the 1993 were drum (please correct me if I am wrong), it should act similar to my OEM MC? BTW I swapped to disks on the front and had...
  2. H2o

    93 Master Cylinder work on 74 fj40?

    It seems the resididual valves are behind a brass cone installed in the exit fitting, where you screw in your brake line. They say to pull it out with a screw extractor, remove it, and reinstall the cone.
  3. H2o

    Residual valves on a 1993 Master cylinder

    thanks. I would imagine not removing it would only lead to premature wear of the brake components... there is a big difference between 2lbs and 10lbs of residual pressure. On my fj40 MC, the residual valves could easily be removed by unscrewing a nut that held them in place. I am looking to...
  4. H2o

    Residual valves on a 1993 Master cylinder

    Inside where you screw in the 10mm brake line? if so how can you remove the rear? Looking ahead when i am ready to concert rear to disk...
  5. H2o

    Replacing 1974 Booster

    City Racer sells the spacers. The SKP booster comes with a spacer. Isn't China the new Japan?
  6. H2o

    Replacing 1974 Booster

    I have a MC from a 1993 pickup that I want to use. It looks similar, and may be the same as your MC (80 series ?) you used.
  7. H2o

    Replacing 1974 Booster

    Do you have the PN for that connector?
  8. H2o

    Replacing 1974 Booster

    Did you connect your MC to the truck brake lights? if so, where did you get the connector?
  9. H2o

    Replacing 1974 Booster

    @Green Bean, What MC did you install? Removing the spacer would give me extra room in the engine compartment, but the length of the rod would be too long. I would have to see if it would give me enough adjustment on the pedal side. I have not yet had time test fit it all.
  10. H2o

    93 Master Cylinder work on 74 fj40?

    Does anyone know where residual valves are located? @archie73, if your brakes are singing, I would imagine your 10lb residual drum valve is still installed? Wouldn't you need to remove it? I was originally running my 74 MC with the front residual valve removed completely, it stopped great.
  11. H2o

    Replacing 1974 Booster

    Last image
  12. H2o

    Replacing 1974 Booster

    My 1974 OEM booster failed a few years ago and have not had time to deal with it. I started rebuilding the 74 booster that had brake fluid leak into it. I tore it down, repainted, and reassembled it, but was unable to get some of the external gaskets to finish the job. Finally getting back to...
  13. H2o

    Residual valves on a 1993 Master cylinder

    Does anyone know offhand where the residual valves are on a 1993 Master cylinder? I would assume they are on the MC as in earlier MCs.
  14. H2o

    93 Master Cylinder work on 74 fj40?

    I have a 74 FJ40. I have disks in front, and drums in rear. I just ordered a new booster to replace the OEM that I rebuilt, but was missing one seal that I could not find, so decided to upgrade to the later dual diaphragm booster. I have a 93 toyota pickup Master cylinder and was wondering if...
  15. H2o

    SOLD Brand New Wilwood Manual Proportioning Valve

    did you sell this yet?
  16. H2o

    Booster for 74 fj40

    I rebuilt the 74 booster myself (or really should say tore it down, cleaned it and reassembled it), but i need one part and could not find it (rear seal). so I shelved that booster. And since it is inferior to the later boosters, i thought i would upgrade. I will try to get some pictures later...
  17. H2o

    Wanted, engine for 1993 sr5 pickup

    Looking for an engine for 1993 SR5 pickup. Thought I would try my luck locally. Thanks...
  18. H2o

    Brake Booster Options

    How did this end? did the booster work?
  19. H2o

    Booster for 74 fj40

    I found a booster from a 1993 mini truck and thought it would bolt up to my 1974 fj40. It is hitting the parking brake cable and housing? Do I need to do any modifications to install this booster? Thanks.
  20. H2o

    Spare booster for FJ40

    He is saying i need a proportioning valve to run disks on the front with a 1974 MC or the rear brakes may lock up. I have been running my former MC for years without problem on the disks. I just removed the valve from the front circuit. never had problem with brakes locking up.
Back
Top Bottom