On my pop's 2014 land cruiser, when the headlights are on low beam are the outer lights the only ones that are supposed to be on? When I put the high beams on the inner bigger lights come on. Thank you
I'm more familiar with the later 40's rear heater which only works when the fan is on high. I believe you have a separate switch, right? I would either replace the switch or the resistor on top of the blower motor.
It's hard to remember but I think it would only stick when I put the key in and turn so that's when I disconnected the battery. It was the switch that was my problem.
Steve, it really hits a good bit and now I ground too much off so I'm gonna have to take the mount off the frame and weld it unfortunately it still won't cure my problem
I definitely have the fj40 pitman arm. I will take your advice on the shim. I'm not sure what you mean by relieving the pedalstal mount, there really isn't any wiggle room there. Did you mean something else?
I think I figured out why I can't turn as far as I should. After taking off the pitman arm, centering the steering, it turns fine to the left but isn't turning all the way to the right because the linkage hits the steering box mount preventing it from turning to full lock. It's because of the...
I believe he stabilizer is in the right hole. I'm pretty sure I used the original fj40 pitman arm and I didn't any of the rods. If I remember right the fj40 arm was bigger. I don't think i can get to the 40 till Monday to see if arm go all the way where it needs to be when disconnected. The...