Rust spots replaced with new metal. Needs minor feathering at seam welds to be perfect.
Under carriage rust proofed with Corroseal brushed primer and sprayed finish coats.
Toyota gear reduction starter. Huge upgrade over original.
All new brake system with new master cylinder, hard and soft...
Price Drop to 15K firm.
Original Colorado truck purchased new in Colorado Springs. I bought this truck a few years ago from a friend who bought it from the original owner (that he knew). I have every receipt since new. My friend fixed the minor rust at the bed seams and had a shop painted...
1994 Hilux Surf in almost perfect condition. Imported from Japan about 10 months ago and fully registered and smog tested in Colorado. 3KZ-TE turbo diesel engine with 242,000km. Absolute blast to drive and gets thumbs up every time I go out. Recent preventative maintenance items include all new...
Looking for someone to transport front and rear ARB bumpers. I'm in Colorado Springs but am willing to drive to Denver or as far as Vail to meet someone. Thanks!
Last summer I completed my LS/NV4500 swap in my 87 FJ60. It's running great but I need to upgrade the cooling system before next summer. I've read a few threads about the subject and am leaning towards a Griffin Radiator....excellent quality but big $$. Anyone have a recommendation with a...
I recently completed a 5.3 LS / NV4500 tranny / stock transfer case install on my 87 FJ60. The stock shifter set-up was binding too much so I decided to purchase Valley Hybrids twin stick kit (very nice!). I'm going to start mocking up the shifters this weekend. Anyone one have a couple pics...
Just finished installing a 5.3 LS / NV4500 5-Speed in my 87 FJ60. Everything is working great except the A/C. I'm using the original FJ60 dryer, expansion valve, and evaporator. The compressor is from the 5.3. We got the compressor working via the tach signal wire. My mechanic buddy has an...
I've done some searching but was unable to find what I was looking for. I picked up a 87 FJ60 with a TBI 350 / NV4500 / Stock T-Case, all connected with an Advanced Adapter (AA) kit. I'm selling the TBI and moving forward with a 5.3 LS swap. I'm hoping others with experience can chime in to...
Anyone install 18" steel rims from a 2008 Tundra fit on a 60 series? I did some searching and came up empty. I have found a set but it's bit of a drive to pick-up. Thanks.
Picked up a 87 FJ60 last month with a TBI 350, NV4500, and OEM transfer case. The previous owner did not have much detail (actually none) on the swap. I'm attempting to figure out the wiring mess. First on the list is to remove the aftermarket temp and oil pressure gauge on the dash. I have...
03 100 Series with 153,000, owned for 1 year. The two scenarios where the faint/dull thunk noise occurs (but not every time) are: 1. Releasing the brake at full stop, immediately hear/feel thunk from rear driveline area. 2. Upon slow acceleration, hear/feel thunk within a second of starting...
I've owned my 03 100 with 140,000 for about 6 months and it has always pulled some to the right. A few weeks ago, I cranked the t-bars about 3/4" and installed new tires. I got it aligned at the dealership immediately after. It still pulls to the right, not terrible but enough to be annoying. As...
78 FJ40 with 94,000 miles and California emissions. Bought it about a year ago and the PO had the carb rebuilt and tuned (valves, timing, replaced emission hoses). The 40 runs great but has a backfire only at shut down. "Dieseling" is a common occurance too. After warm-up, the exhaust note...
I installed the JT Outfitters mini truck PS kit this weekend on my 78 40. Straight forward install but the pump bracket required some gridding to fit around my valve cover...no biggie. The issue is the rag joint joint is not flush between the box and the steering column. The joint is not...
First post with my new login credentials. I just picked up a 03 100 series and I'm working on fixing/replacing a few minor issues. One issue is the rear cup holder tray is stuck closed (I think). I search for a solution with no luck. Push the face and it should pop open...right? It looks like...