Search results for query: *

Forum search Google search

  1. Tin basher

    Don't Miss It!: 22nd Annual Cruiser Days, July 22, 2017, Hougen Park, Abbotsford, BC

    I drive a cruiser like the odometer works hahah any land marks at that 32 km
  2. Tin basher

    How do i make this work...

    Looks like the nut is missing that holds it together
  3. Tin basher

    First vehicle for my teen , 2 options

    Get him a Honda to drive gets decent fuel mileage And pretty hard to kill
  4. Tin basher

    Quick steering misalignment happened

    Check your tire pressure a soft tire will cause those symptoms
  5. Tin basher

    What Steering Box Do I have?

    It's probably leaking because the welding has warped the housing And x10000000000 on it being unsafe
  6. Tin basher

    What Steering Box Do I have?

    Looks like a Saginaw box that someone has welded a mounting plate to the threaded holes facing up are the proper mounts The pitman arm looks like a modded bronco f150 one Will suck if it starts leaking because you won't be able to just get a replacement I'd ? The quality of the weld to cast...
  7. Tin basher

    V8 gurus - Lend me your collective engine location knowledge!

    @RWBeringer4x4 I would replace that mangled timing cover before finishing the front of the engine maybe replace timing chain while balancer and cover is off
  8. Tin basher

    Wheel choices? What bolt pattern?

    The centre hole in a Chevy wheel is smaller than a landcruiser I have Chevy 15x8 on my 40 but had to cut out the centre
  9. Tin basher

    V8 gurus - Lend me your collective engine location knowledge!

    I'd like this explained how this works rear shaft from a Yamaha quad and yes that is the only way it will spline together
  10. Tin basher

    Resuscitating My vortec Powered 60, Wont Start

    Has the vehicle antitheft been turned off in the computer ?
  11. Tin basher

    Best location for louvers in hood for heat egress (w/pics)

    It is sorta a jeeple thing to put louvers in the hood of your stock 6 cyl rubicon so it doesn't run hot it the Donut shop drive through
  12. Tin basher

    Best location for louvers in hood for heat egress (w/pics)

    The factory louvers are tapered the back one is wider than the front one I should have measured them first lol If a 460 big block doesn't need extra airflow your diesel should be fine
  13. Tin basher

    V8 gurus - Lend me your collective engine location knowledge!

    @RWBeringer4x4 my 40 had a 327 no holes in heads originally I held off doing the powersteering because of the same problem you are having mounting the pump Two years ago I had enough of hearding it around on 38s and swapped in this motor One option is to get a power steering pump Out of a jeep...
  14. Tin basher

    V8 gurus - Lend me your collective engine location knowledge!

    Guess this won't help you being as how you don't have bolt holes I your heads I But might give an idea I think the v8 has to be offset 1in to the right to clear the stock steering box When this had the ram horn exhausts in it and stock box there was maybe 3/8 to 1/2 in clearance
  15. Tin basher

    anti- freeze running out of my exhaust

    Just hope it's a honest shop and they know what a carb and points are and don't spend a day looking for the scan port Unfortunately many of today's mechanics are parts replacers and lack basic diagnostic skills
  16. Tin basher

    Bizarre Issue with a '76 FJ40 - Help is appreciated!

    How was your coolant level ? There is usually only two things that will seize a motor up without making a bunch of noise and locking up Heat or lack of lubrication and lack of lube the engine should have sounded different loud valve train and possible knocking I have only once had a motor...
  17. Tin basher

    Putting a 302 engine in a FJ40

    The 302 is a nicer swap in a lot of things than a Chevy because the engine is narrower and lighter and the dist being in the front helps with firewall clearance And bet it will clear the stock steering box better
  18. Tin basher

    anti- freeze running out of my exhaust

    Are you sure it's antifreeze black smoke is rich Antifreeze is white smoke and has a sweet smell to it And by leaking out flange are you talking flange to head Or the flange from manifold header to exhaust system
  19. Tin basher

    anti- freeze running out of my exhaust

    Was it water or antifreeze if it was water condensation in exhaust dripping out If it was antifreeze head gasket
  20. Tin basher

    RUF "rears up front" I DID IT, and it's amazing

    Looks like it pulls pretty good Funny I was looking up gambler 500 to find out about your car and this video came up
Back
Top Bottom