I have a '94 and just finished an engine/tranny rebuild and today we tried to fire her up. Initially, I had no click, won't turn and won't start but there's power. I check for spark, nothing. There was no check engine light so I was told to check ECU harness. I unplugged and plug the connectors...
So, I did my HG @210k, sometime in June 2020.
No failure on the HG, while I had the top end off, I thought to myself, let me do the HG. I had nothing to do during pandemic I guess.
She had no issues before this job.
First mistake, I messed with a HG that is not broken. I used OEM kit and head...
A442- 1994. Approximately 100k on the transmission. Oil was always good and clean, no signs of slipping or any issues prior.
So, at Turf N' Surf, my tranny failed, it won't go in gears. I've checked the dip stick at the time and it showed way more than full but it was still clean. Not sure what...
Trying to get more directional info on this Bald Mountain trail down in Fresno. We planning a trip up there next week. We’ll camp at shaver lake and do some of the trails that are possibly open.
Ranger says it’s open as of now but expecting snow this week. Snow wheeling would be nice.
Any camp...
1994 201k miles.
it's the first time she threw a code on me since I got her in 2012...
I did the paper clip thanks to Joey my paper clip don't come off anymore!
I steamed washed her from top to bottom, covered the distributor in plastic then she gave me a CEL.
It flashes twice then a long...
Hey guys, I'd like to get the concensus of the more experienced..
I can get this for free but i'd like to know if it's worth rebuilding or spending money (that I don't have)...
It's a Jayco Summit and the owner said he had brake issues on the road and caught on fire. Damage on the axle and...
I got complacent. I usually check knuckle studs on a long trip like this.
Last I've checked the knuckle studs was at Rubithon this past June, and did a couple of short trips between June and September. I left California on to Portland without checking. The rest is history.
Nevertheless...
hi all,
We are in the process of deleting the AHC, and installing Slee HD 2.5" lift kit.
Will there be fitment issues on installing 35x12.5x17 or 18, using after market rims? It's a 2006 100 series.
Thanks.
Two weeks ago I had to change my front diff gasket since it had a leak, so I had to pull the axle shafts so I can get the DS out and pull my 3rd so I can put the new gasket.
Putting the short shaft back was quick and painless. But the longer one (driver side) took me almost 20mins to get the...
Hey guys, I'm an 80 regular but wanted to ask the 60's expert on where to source a rock slider that won't take 4-6 weeks to deliver.
We've decided to take our 60 to Rubithon as well, but we need sliders. Most vendors takes 4 weeks to deliver. We can take a kit and weld it if need be.
Thanks...
285/65/18 $700
Still in the Hundy, hoping someone would be interested in buying these so we can get 35's in time for Rubicon in June... Almost 6k miles on them, no chips, no damage...
pictures to follow...
Thanks...
John
I just realized that Carnegie is close by where we live now. We just moved here in Mountain House, Ca (near Tracy, Ca).
Has anyone seen this place? Is it just like the Hollister OHV park?
-John
My driveway is a bit inclined so when I pulled in front end first into the driveway (since I came back from TnS), for 4 days parked I saw a good amount of oil under, I want to say about half an ounce or so. I then parked it opposite, rear first, and for two days I saw few drops.
Two days ago I...
Does anyone know the part number for this AC line? It's coming from the firewall to the AC.
Sorry for the picture. My uncle don't know how to use a camera phone...
Thanks...
So, my uncle and I just finished a motor swap/rebuild on his '96. We tried to fire her up yesterday but won't start by turning the key. But if we bypass it and directly hotwire the starter to the + of the battery she will fire up.
It seems that there is no 12v going through the starter.
Is...
Hi guys. Is this the right part number for my passenger side TRE? This is for the one in front of the axle that connects with the steering damper.
I've ordered this and when the old one was pulled, the new one is .004 thicker than the old one. I couldn't get it in the tie rod itself.
I've...
I couldn't get my lever out of "P" to any like D, N, R... But coming from the other end it would easily slip into park "P".
So I popped the small plastic cover on the top part and I have to manually press it with a screw driver to release it from P. When I press the button it doesn't release...
Please educate me on this for I know it's not right because there's too much RED... LoL.
I used to have medium lift, 33's and no CC bushings and drove fine for years, it's not brand new truck so I didn't expect it to be perfect but she had no bad manners on and off road. Drives straight...
Please showcase your rig here if you are running J springs on a 35" tire and if you're running armour, sliders, etc… I'm sitting on 35" with OME medium lift with armours right now.
I will most likely go this route and would like to see some pix that are currently set up this way. I know there...
I just purchased 4.88's from Nitro and ARB front locker (rear already installed). This is in prep for my planned (1st time) Rubithon experience.
I am no gear head (my skills are limited and this job is way out of my league) and my uncle has been my go-to wrench guy, he's a decent cruiser head...