I am usually ok at finding things on mud but this time failed. This is not the window mechanism.
The front of the driver’s window follows a u-bend track as it goes down. This track looks to be connected at the bottom by two spot welds and by something at the top.
My track has become...
Probably a stupid idea since I have not seen it yet, does anyone use a pneumatic cylinder and compressed air to lift and lower their RTT?
I have a CDN M101 and copying a bunch of you built a rack the keeps it in the down position when driving and lifts it to 6’ when camping. I currently...
Hi. Replaced my rear bearings and now my right rear brake calliper is not centred. Rubs the disc on the outside.
The only thing I can think of is I did not seat the bearing raceway all the way. The inner one is not in far enough in so the shaft is sticking out 1/16” or less to far...
Did I diagnose this right?
Rear passenger side wheel hot and smells burning. Put in new brake pad not long ago. Car is hardly driven and not by me so this may date back to then. I pulled off the caliper. Pins are loose. Piston moves ok. There is rust stains on the ouside of piston under...
Just finished raptor lining the bottom half.
Started the job because of rust around wheels wells. If you have not removed your fenders run out and do it before the body rusts beneth them. I put it off for years and regretted it.
Lots of advice on Mud so won’t expand.
Only other...
Hee Hoo.
On the summer road trip with the family and my driver's door will not open. I think it has something to do with the electric unlocking system but can't figure out what.
Is there a way to reach in and unlock it manually at the latch?
Symptoms:
-Using the electric door lock I can...
Short story shorter. Dropping front driveshaft to replace worn spiders. 6 of the 8 bolts came out easy. I rounded the heads on the other two (my bad). One is on diff side and one on transfer side.
Any advice on best way to remove? Any mistakes I should avoid? Don't want to damage the...
There is 96 fully locked, with 250k for sale down the street from me for $3500. It has a blown head gasket.
I have an unlocked 93 that I have just got up to date on maintenance.
Should I buy second one?
Cost of doing head gasket job if I do the labour myself?
A M104 trailer up for grabs on gcsurplus.
https://www.gcsurplus.ca/mn-eng.cfm?snc=wfsav&sc=enc-bid&scn=180296&lcn=325717&lct=L&srchtype=&lci=&str=51<nf=1&frmsr=1&sf=ferm-clos
Looking for the best way to leave food in the trailer: cnd M101 with tarp cover.
Anybody ever charge their trailer so it acts like an electric fence? Maybe install electric fence wiring around it?
Situation:
Family of 6 in a 93 LC and CNDm101 trailer. Last summer we kept all the food in...
What is the quietest weld in after market muffler?
My muffler was quiet but leaking so bad that I had to get it replaced. Brought it to my local guy who held onto it for two weeks and did nothing. :bang: After going through the threads read about the bolt in Bosal and almost ordered one...
To help others:
Symptoms:
1-driving with cruise control control. When flick on high beams the cruise contol drops out.
2-headlights dim when operating power windows.
Solution: Bad battery. I think it has slowly been going bad for awhile.
Search results ended in with cricket threads in 2012. Here's hoping.
The heater valve cable on my 93 does not move when the slider is moved inside. I notice this after changing out te coolant hoses and trying to adjust the valve. This might explain why I had little heat all winter...
Almost don't want to ask this question.
Are there any risks to installing hub centric alloy wheels on a 93 LC which had lug centric wheels?
The story: I bought a set of five OEM alloy wheels with BFG ATs off a fellow LC owner a couple of weeks ago. Unfortunately, I just looked at one wheel...
Went to change my thermostat today and found the surface under the gasket pitted. This likely explains my slow coolant leak and corrosion on one of the studs.
The rest of the housing is fine. Isolated to just under the gasket.
Solutions? There is a thread on the 60s forum where he talked...
I want to make the rear lap belts safer. Anybody tried these or something similar.
http://www.crelling.com/CB%20SINGLE%20SEAT.html
http://ezonpro.com/e-z-on-1086-camharness-for-school-buses/
"Racing" harness will make it a cool place to sit. :-)
There are some threads on installing a...
When idling my 93 only blows cold air. When driving it heats better than any other vehicle I have ever had. Does not matter if it's highway or just around town. Anybody have this problem?
Thinking it's the thermostats but other threads on poor heating say the reverse. Heats well when idle...