Search results for query: *

  • Users: djawahir
  • Content: Threads
  • Order by date

Forum search Google search

  1. djawahir

    For Sale  San Diego - Fj60 or FJ62 Body lift pucks

    Roger Brown 1” lift pucks for FJ60/FJ62 for sale. I don’t have the bolts, etc. This sale is for pucks only! Nothing wrong with them. I’m just funding my project build… $35 plus shipping…
  2. djawahir

    For Sale  San Diego: 10/85-1/90 Idler Shaft 38mm

    For sale is a brand new idler shaft for the FJ60. It's part number 36225-60050J or 36225-60050 J. It's never been installed. I'm clearing out my garage! $30 plus shipping.
  3. djawahir

    For Sale  FJ60 Headlight Ring Bucket (Right side) or Passenger side for US!

    Selling this new right side headlight ring for the FJ60. I accidentally bought 2 right side ones. The right side is determined when you are sitting behind the steering wheel! The part number is: 81153-90A02. Just for reference, the left side part number is: 81113-90A02. $15 shipped to...
  4. djawahir

    SOLD  FJ60 Headlight Mounting Brackets and Silver Trim

    $20 plus shipping cost. Pulled from my 1987 FJ60. These have a little surface rust, but they are in working condition! I bought new ones, so these have to go. I’ll include new adjusting springs. You will need screws for the silver ring trim, though.
  5. djawahir

    For Sale  FZJ80 LX450 E Brake Parking Brake Handle

    $20 plus the ride! Works great, just some marks on the grip. I didn’t use it for my project, so it’s got to go!
  6. djawahir

    For Sale  San Diego: FZJ80 (LX450) Knuckle Shims

    I've got some parts that I'm not going to use on my 80 series knuckles: 43233-60030 - Steel Shim Knuckle .20mm (I've got 2 of these) 43234-60020 - Steel Shim Knuckle .50mm (I've got 1 of these) 43235-60020 - Steel Shim Knuckle 1.0mm (I've got 2 of these) 43236-60020 - Steel Shim Knuckle...
  7. djawahir

    FJ60 Steering Column Bearings

    So, I'm posting this here since I didn't come up with any good results when I searched. I spent way too much time trying to figure out the numbers on the bearings, too. After removing my steering wheel for some R&R, I decided to see what conditions some of the bearings in my steering column...
  8. djawahir

    For Sale  San Diego: Tacoma rims 2005-2015 17" x 7.5". 6 lug pattern, just like the 80 series and other Toyota 6 bolt!

    2005-2015 Toyota Tacoma wheels or rims. A set of 4. 17" x 7.5". 5 spoke Toyota OEM wheels. I used these on my truck project to roll it around. I finally got my new rims on it, so these have to go! $400 for the set. The tires are mismatched, but they hold air! Perfect for your rolling...
  9. djawahir

    SOLD  San Diego: FZJ80 Front Radius Arms stock

    Front leading arms or control arms or front radius arms from 1996 Toyota Land Cruiser. Removed because I installed a lift. Nothing wrong with them! Clean! Will fit 96-97 Lexus LX450. Will most likely need new bushings, though. $100 for the pair. Toyota part number: 48610-60020
  10. djawahir

    Front Panhard Axle Bracket - What to do?

    So, I'm finally trying to get my project truck back on its feet again. It's been sitting for years and all I've been doing is getting older. After looking over the front axle, I found this panhard bracket tab broken off and rewelded to the axle. The bolt hole isn't even lined up properly...
  11. djawahir

    SOLD  San Diego: LX450 stock springs (1996)

    Used stock coil springs from my LX450 conversion project. Front and rear. I’m willing to separate front set from rear set. I can ship on buyers request. Buyer pays shipping. If you have other questions, ask! $150.
  12. djawahir

    MUDShip  I need a car transported from FL to CA

    I’m looking to get an old car from Tampa, FL to San Diego, CA. Car is running and drivable. It’s ready for pickup now! Any leads would be greatly appreciated!
  13. djawahir

    For Sale  4x4 Labs Rear Bumper For FJ60 w/ Tire Carrier and Ladder (Great Condition)

    I'm selling a 4x4 Labs bumper for the 60 series. It's in excellent condition. I bought this from a fellow MUD member for my 60/80 project, but I've since decided to go full custom and not cut this one up. I'm reposting the same pics that the original mud member posted here for sale as it shows...
  14. djawahir

    For Sale  FJ60 V8 Swap Rolling Chassis in Great Condition!!!!!

    SOLD!!! (If there's a way for me to delete this thread, let me know!) Here's the deal. A few years ago, I did the GM 5.3L V8 swap to my very cherry 87 FJ60. I mated the V8 to the Advance Adapter and ran my H55F and stock transfercase. Before that, I did a bunch of stuff to make this a solid...
  15. djawahir

    For Sale  1996 LX450 stock wheels (worn tires still mounted) - San Diego

    Guys, I'm looking to get my FJ515.3 project going again and I want to sell my LX450 rims to get a set that more matches my FJ60. I've got 5 rims with the tires still mounted. The tires are worn out and probably shouldn't be driven very far. 4 of the wheels are sitting on my rolling 80 chassis...
  16. djawahir

    Gen III V8 Engine with FJ60 Radiator - Molded Rubber Hose

    I've been dealing with a lower radiator hose leak ever since I did my Gen III (L59) V8 swap a couple years ago. I had a 15" Spectre Flex Hose with 1.5" ends for this entire time. I hate flex hoses. At two to three times the price of a molded rubber one, they should work flawlessly, but most...
  17. djawahir

    V8 flywheel stepped? Marks Adapter stuff and H55F

    Hey guys, I need some help. When I did my 5.3L Vortec to H55F swap using the Mark's Adapter, I used the centerforce clutch and pressure plate mounted to a 168tooth GM flywheel from Downey. All of the parts were recommended for the swap as sort of a plug and play setup. After installation, I...
  18. djawahir

    Parking Brake Rebuild Questions

    Hey guys, does this look correct? I'm doing a full rear axle rebuild and the LX450 manual is terrible for the parking brake section. After reading it (about 10 times) and perusing the other 80 axle pictures here, I've pieced the following parking brake setup in the pictures below... If there...
  19. djawahir

    FJ60 frame from San Bernadino to San Diego

    Anyone regularly travel from San Bernadino (Devore Heights) to San Diego? There's an FJ60 frame up there that I'd like to have transported down this way. Let me know! :cheers: Thanks, Dylan
  20. djawahir

    1998-2002 4runner rims on an FJ60?

    Does anyone have these and if so, do they work? Backspacing? Pictures on a 60 would be awesome! Thanks in advance!
Back
Top Bottom