I have the Smittybilt X2O 10k syn in mine. If you're asking about fit, they are roughly the same size and it fits fine with enough room to get my hands all around it.
Posting for a friend. Details are in his Craigslist ad. Vehicle has been well maintained, but both bumpers have minor parking lot damage, the AHC has started acting up, the power windows/door locks are approaching refurbishment time and the CD player is done; typical wear for 100 approaching...
Hit a deer Friday and ordered my T17 yesterday from Slee. My shop worked with my insurance company and I’ll be just $158 out of pocket for the repairs, bumper, and winch plate. :)
Posted today on the TJM website: NEW Product - Front Bumper - LC100 Series 1998-2007 | TJM USA
also - TJM T17 Front Bumper Suit LC 100 Series 98-07 | TJM USA
This is pretty interesting. Decibels are a logarithmic scale. 80dBA is perceived by your ear/brain as twice as loud as 70bBA. This should be a very noticeable improvement. Just found my next $100 project...
Resolved!!!
I'm almost embarrassed to admit that I solved this mystery after almost 6 months. My WKOR sliders had either shifted up or my body has settled down just to the point of occasionally touching. There was clear evidence of rubbing on the DS fender liner (which I've now trimmed) and I...
My neighbor has an '04 LX with the integrated hitch, which I'm jealous of. I have an aftermarket hitch on my '01 and hate how it looks and how low it hangs. I was poking around today and see that I have the four welded nuts on the back of my rear cross member, but no 2x2 hole for the insert to...
238k miles. Assume they were original. Took about an hour, but will be easier next time with the clamps now better positioned. The one is pieces was super fun to get out. May have lost a sliver or it may be sitting behind the engine...
I feel good about it. I did 5 miles on the highway this morning, both hubs and dust caps were cool to the touch. After 20 more miles, I hit them with a FLIR, hubs were both right around 98F, brake rotors were around 200F.
And yes, the PS bearings that took the higher torque were 30k miles...
Are you getting this 23 ft-lb with a completely clean and dry adjusting nut against a clean/dry claw washer? I had a lot of grease in there and ended up with a final torque on the adjusting nut closer to 40 ft-lbf to achieve 12 lbs on the fish scale. I'm nervous I've overdone it...
Repacked PS and replaced DS wheel bearings and races. Very unhappy to find that my local dealership used a screwdriver and hammer to install the hub nuts the last time the job was done.
Tackling heater hose tees tomorrow night and ordered new motors for the front door lock actuators.
Wanted to share my experience (no affiliation with them).
1/19 - requested swatches
1/20 - request confirmed by Lseat
2/2 - asked for status and was told they'd shipped
2/17 - swatches received and order for front seats and 3 sq ft of hide in BISQUE placed ($341.50 shipped)
2/25 - order shipped...