Hi all, I gave up on fixing it and removed my Prestige Platinun by Audivox alarm system, model APS-400. Before removing it, all door locks worked fine.
After removing it, only the drivers door lock works. I know this system was a Southeast Dealer Install only one, but the install on mine...
I'm looking for a factory Spare Wheel for my 97 40th Anniversary land cruiser. It simply doesn't have one and the PO had no idea where they might have put it "years ago". I'm keeping the stock wheels for now, so looking for a matching spare if anyone has one you're not using near Birmingham...
Hi, I'm looking for OEM Bumper Corners for both the Front and Rear of my 97 40th Anniversary land cruiser. My Passenger Front Bumper Corner was in a wreck and my Rear Drivers Bumper Corner has a puncture. I may try to repair them, but it'd certainly be easier if someone has some laying around...
Hi, I'm looking for a Passenger Front Fender Flare for my 40th Anniversary 80 Series in 1B2 Antique Sage or the 3 Plastic Tabs that I can adhere back onto it (they are all missing on mine). I'm in Birmingham but can drive within a few hours as needed. See pic below of it missing.
Thanks!
Hi, I'm looking for a set of Front and Rear Factory Locking Differentials, the interior locker switch, wiring from the cab to the axles (I think 97s were pre-wired everywhere else), and the control box that goes in the passenger kick-panel. Maybe also the Locking Differential Indicator bulbs...
Hi, I'm missing the factory spare wheel/tire from my new-to-me 97 40th Anniversary Land Cruiser (see pic). Does anyone have one laying around within an hour or two of Birmingham?
Thanks!
~Charles
UPDATED: Bold items still needed. Strike-through items have been acquired or pending.
Hi all, I'm now to the stage where I need to source some parts and advice on this build. Any help is appreciated:
Parts Needed:
Front Passenger Fender Flare or 3 Plastic Tabs (ideally 40thA Antique Sage...
Hi all, I just up a one-owner, no rust, originally purchased a few miles from me and has been here since 1997, 40th Anniversary Land Cruiser today. Pretty excited about it. Cosmetically it is really rough, but mechanically it’s sound. Excited to begin the restoration process. A few pics from...
***SOLD***
We’re gauging interest in our Steel City Racing 4Runner. Sadly we can't race King of the Hammers 2022 due to changing priorities, so we are seeing if a qualified buyer is out there. It’s arguably the most capable 4th Gen 4Runner ever built, but is also highly versatile given we...
Hi everyone,
I haven’t posted in the 100 Series section much, but have always been heavily involved in the 80 Series (Builds - 80 Build Thread - PreWork & 1 Weekend) (80 was sold to Mud member a few years back) and 4th Gen T4R area for Steel City Racing 4x4 (Builds - Steel City Racing: King of...
Check it out. I may need some local cruiser help with this one! I'm in Birmingham (Vestavia).
Steel City Racing: King of the Hammers 2019 Toyota 4Runner IFS 4600 Build Thread
And follow us on social media:
Facebook: Steel City Racing
Instagram: SteelCityRacing (@steelcityracing4x4) •...
Steel City Racing: King of the Hammers 2019 Toyota 4Runner IFS 4600 Build Thread
Follow this build on Social Media at
Facebook: Steel City Racing
Instagram: SteelCityRacing (@steelcityracing4x4) • Instagram photos and videos
ADDITION FROM AFTER KOH 2019
I've had a ton of requests for a...
Just bought a new 1st gen 4unner and am looking for:
1) Rear flat bumper and the two black corner pieces that match the image below (have the black pieces that go from the corners to the wheel wells so I don't need those).
2) Antenna Mast for the attached pic (have motor)
3) Drivers carpeted...
I'm looking for a 1st gen 4runner rear bumper and the two black corner pieces that match the image below. I already have the black pieces that go from the corners to the wheel wells so I don't need those.
I'm in Birmingham - 35216.
Hi, I'm starting another '87 SR5 Turbo project and want it to have a stance similar to the one in the attached picture.
The description says:
"All four wheels were freshly re-powder coated and wrapped in New BF Goodrich AT KO2 tires. A 3" Old Man Emy lift has been installed with all fresh parts...
***SOLD***
Fully Built 1996 Toyota Land Cruiser 80 Series with Factory Lockers
I'm reluctantly putting my 1996 80 Series Toyota Land Cruiser up for sale. It has been my daily driver for the past 6-years and our family loves it. Even though I swore I'd never sell it because I couldn't ever find...
Hi, this is going to sound like a weird question.
Background:
I'm planning a KOH 2019 stock class 4600 build and am researching 1st gen 4runners (I have an '87 SR5 Turbo in the garage). Given the limitations of the Ultra4 Rulebook, engines and suspension have to match across year/make/model...
Amazing Condition 1987 Toyota 4Runner SR5 Turbo Automatic with Low Mileage. I am confident you will not find a nicer 1st Gen SR5 Turbo 4Runner than this one. If you are reading this post, you know this is a “unicorn” vehicle. The SR5 Turbos simply do not exist in this condition anymore and...
It hit me - Today is the day that most teams begin dreaming about and working on their 2019 KOH builds. Over the past week, like many of you, I watched most of the 2018 KOH / KOH EMC coverage. And, like many of you, wished I was there. So, I've decided to do something about it.
My first...
***SOLD***
Mint Condition 1987 Toyota 4Runner SR5 Turbo
112K Miles with Almost New 22R-E Engine and New W56-B Manual Transmission
We purchased this mint condition 1987 Toyota 4Runner SR5 Turbo earlier this year. I’ve looked and cannot find a nicer 1st Gen 4Runner than this anywhere in the...