Search results for query: *

Forum search Google search

  1. S

    My 45 Project

    Cheers for that just one question? I have already got the 60 series TRE Kit will that work with the 70 series tie rod and drag link? Cheers Sherms
  2. S

    My 45 Project

    Needed to pack the CV joint (axel knuckle) with greese then aswell as greese the outside of the axel. Also had to pack the bearings with greese.......This is a time filled job if you dont have the right equipment (which we didn't) so it had to be done by hand. Big thing to remember...
  3. S

    My 45 Project

    Cleaning everything was a pain in th ass!!! seen as the swivel hubs were from the wreckers and i was doing a complete swap all the paper seals had to be chiseled off, all the greece had to be water blasted off about 1 ton of degreeser was used in the cleaning of all of the bits and pieces. all...
  4. S

    My 45 Project

    To take the swivel hub completely off you need to undo th bolts at the back of the swivel hub that holds the hub seal kit together as well as the 4 nuts on top and the bottom which holds your steering knuckle arm and your top and bottom king pin bearings. After that you can just pull out the...
  5. S

    My 45 Project

    Disc brake conversion Rightio, The first part is easy, Take off the free wheeling hubs remove cir-clip undo both ajusting axel nuts aswell as the locking washer and claw washer and you have the external part of you drum off.:) About 20 miutes of work each side, nothing to difficult but do need...
  6. S

    My 45 Project

    the Bits Cheers for the heads up on membership :) So here is a picture of the bits i have got. A 60 series full hub assembely rotors callipers and all and 60 series power steering box and 5 speed gear box.
  7. My 45

    My 45

    • sherms
    • Album
    • Comments: 0
  8. S

    My 45 Project

    Hey, So have been tinkering a bit with the truck and have got the disc brakes on and am starting on the power steering! Would love to chuck some more photos up but have reached my limit....... How do i increase this cause i have a bucket load photos to put up.
  9. S

    Project Ambitious: 1UZ FJ40 - Help Needed!!

    Awesome thread! I am going to put a 1UZ in my 45 after seeing this!
  10. S

    My 45 Project

    Cheers for the reply everyone! Have gone out and found a 5 speed gearbox and transfer, 4 pot disc brakes for the front end and took the whole steering column and power steering box from different 60 series laying around the wreckers. Photos soon to come :)
  11. S

    My 45 Project

    Hey, I'm putting a 1UZ VVTi and a 5 speed hilux gearbox into my 45. I want to give it a 2 inch body lift. So i have a couple of questions. I need to swap over to disc brakes is there a conversion kit for this at all, if so is there any mods that need to be done? Will the 2 inch lift give me...
  12. S

    Project Ambitious: 1UZ FJ40 - Help Needed!!

    Hey, I really like what you've done to ur cruise and would like to do the exact same to mine!!!!! :) Do you have diagrams of your engine mounts and adaptor plate so i could also do this conversion??? Also do you think there is enough room for a turbo?? Cheers Ur 40 is AWESOME!!!!
Back
Top Bottom