2H oil pressure is 80 psi at 3,000 RPM. As the bore wears the pressure relief piston no longer sits square on in the bore and wears a lip. Best to smooth out the lip by linshing while the piston is out before replacing extended piston then new piston won't catch on the lip in the bore.
The other...
I rang Mike Carney Toyota in Townsville Qld and spoke to Michael just now their phone # 07- 47594200 [need Australian International dial ] in front of that number.
He said the part number for the HJ60 is 28631 68020 and it costs a staggering $132.00 inc GST.
Said it was available EX Brisbane as...
This will not be the same as your set up however you should get the idea of what part does performs each function and how the wheels are coupled together with an intermediate rod and tie rods. And are then are moved by the steering box [or idler] rotating a pitman arm or similar and the other...
Mate take some better pictures of the parts. Has it completely screwed out or is the end broken off? We can't tell much from those pictures you have posted. I am not sure what truck you have but the other end should go to the steering box or a steering idler.
If that part was broken on my HJ75 I...
G'Day Kurt, Great write up and pics. You were lucky in a way to see that part of Oz when it was wet, LOL it don't rain out there every day. Best regards and thanks for sharing.
Good point DiehSt, When I got [BeanZ 's] Dave Tay's from the USA injectors rebuilt here by Berrima Diesel I had to get the number from his injector pump as the 1HDT injectors are matched to the pump's number. I had forgotten about this.
Here they usually break and enter, or sneak in the back door, steal the keys for commodores and falcons then after hooning burn them on the salt pan flats. Being minors they get off scott free and repeat the same next week.
Ok Mate, This could cause you to have a very serious accident, imagine crossing to the incorrect side of the highway at speed or inadvertently running over some person because of steering failure. It needs urgent attention for sure. In Australia Transport Dept or Police would defect your vehicle...
Here is a couple of pics of the pumps from the Toyota Bible.. The 1HDT has a dual spring injector with a cartridge in it. These injectors have very critical settings and it is near impossible to repair and reset them without the proper Denco machines. In Australia Denco will not sell this...
Must be something wrong with my 2H as it has plenty of oil going to the vacuum pump and not sure why anyone would take oil from the vacuum pump return line. When this hose fails you will see what I am saying LOL.
Wow, I find this hard to fathom. The 2H has about 25psi at idle, 80psi at 3,000 RPM. Most older 2H=90%+ motors have around 100+PSI as the bore in the pressure relief valve wears unless a longer after market piston is fitted to reduce the pressure. There is plenty of oil there even with a new...
That TO4 Turbo is usually what the mildly plus modified VL Commodores use with the Nissan RB30 motor. Need to check the numbers to find what is on the compressor and exhaust of the turbo to see if it is suited to the low reving diesel check with Duncan about this aspect. I have emailed and...