Search results for query: *

  • Users: sammybones
  • Content: Threads
  • Order by date

Forum search Google search

  1. sammybones

    Trail damage to front door

    Bashed up my front and rear passenger doors pretty good on the trail. I’ve already replaced the rear. I’m having trouble sourcing a front. My truck is an 04 so I’ve been searching 03-07. Does anyone know if 98-02 doors are compatible with a 04? Thanks MUD.
  2. sammybones

    Transfer case leak

    So I’ve got a slight leak at the front seal of my transfer case. Should I replace the bearings while I’m in there replacing the seals?
  3. sammybones

    Torsion bar adjustment bushing

    I’ve got a squeak coming from underneath my truck. I think I’ve pin pointed it to where the rear torsion bar goes into the adjustment port. Is there a bushing in there that needs to be replaced?
  4. sammybones

    Smittybilt XL w/ Annex For Sale in Atlanta

    Smittybilt XL Gen 1 with Annex. I’ve had it about 2 1/2 years. Used it probably 10 times. $800 obo. Located in Sharpsburg, GA. I’ve got a 100 series and use Rhino rack load bars to mount it on but there is no reason it won’t work with a stock rack. If interested I’ll throw in the load bars for...
  5. sammybones

    SOLD  Atlanta, GA - Smittybilt XL w/ Annex

    Smittybilt XL Gen 1 with Annex. I’ve had it about 2 1/2 years. Used it probably 10 times. $800. I’ve got a 100 series and use Rhino rack load bars to mount it on but there is no reason it won’t work with a stock rack. If interested I’ll throw in the load bars for $300.
  6. sammybones

    06 LX transmission issues

    So I’ve got a 06 LX with 155,xxx. It has developed a hard shift from 2nd to 3rd at about 30 mph. Also, while backing my trailer with a load of firewood up my very steep driveway I got a shimmy from the rear. I took it to my mechanic and he has referred me to a local very reputable transmission...
  7. sammybones

    Wanted  Thundercloud Metallic passenger doors

    I’m looking for front and rear passenger doors.Thundercloud Metallic. I’m in Atlanta. I just discovered Greyhound will ship large car part and it’s quite cheap. Thanks for looking.
  8. sammybones

    MUDShip  Morristown, NJ to Atlanta

    Need a 100 series door shipped from Morristown, NJ to Atlanta. Surely someone is driving down for Spring Training or something.... @anavant
  9. sammybones

    Door replacement

    Are doors from different years interchangeable? I have a 2004 and need to replace the front and rear passenger doors due to some pretty severe trail damage. Hopefully I don’t have to only look for 03-05 doors. It’s hard enough finding them in the right color (Thunderbuddy Metallic).
  10. sammybones

    Parting Out  WANTED Atlanta 100 series doors

    03-05 100 series passenger front and rear doors, Thundercloud Metallic.
  11. sammybones

    Nitro gears vs Sierra gears

    Is there a difference? I just bought front and rear lockers and went ahead and bought 4.88’s. I was a little surprised when I unpacked every and they were Sierra’s, I was expecting Nitro’s.
  12. sammybones

    GSMTR

    Figured I’d start a thread. I’m heading up Wednesday morning. I believe the following GA Cruiser folks are coming- @abuck99, @ga12r1, @bencallaway, @MongooseGA. I’m sure I’m leaving someone out. My cell is 863-370-1571. Hit me up and we will start a group text. I’ll have a big pot of chili...
  13. sammybones

    Ironman winches

    Ironman has a really good sale on winches. Anyone using one? I’m runnning a Smittybuilt 9.5 but it’s tempting to buy an Ironman 12,000 lb one at the price point.
  14. sammybones

    SOLD  Ironman Rear Springs for 100 series - Atlanta, GA

    Ironman TOYO13B rear springs. These are rated for 0-440 lbs in the rear. I only had them on for 2 weeks and maybe 100 miles. I’m seliing them because I needed firmer springs. $150 and I’ll pay the shipping.
  15. sammybones

    How much lift is too much?

    I searched, could not find the answer to this specific question. What’s the highest you should go? 22 inches hub to fender in the front (with diff drop and UCA’s)? 23,5 inches in the rear?
  16. sammybones

    2863’s with 30mm coil spring spacers

    Anyone running 2863’s with 30mm spacers? I was running 2860‘s with the 30mm spacers but they weren’t firm enough when I loaded up the RTT and other gear and headed out wheeling (my truck is not a DD). I recently installed the Ironman Foam Cell Pro’s and 0-440 springs and that was a mistake as I...
  17. sammybones

    MUDShip  Atlanta to Salt Lake City

    Lift kit from ATL to SLC
  18. sammybones

    SOLD  Atlanta, GA - 100 series lift

    OME 2860 springs, OME nitro charger rear shocks, Ironman nitro gas fronts and Tough Dog torsion bars. $600 obo plus the ride. Prefer local pick up of course. Just installed Ironman Foam Cell Pro. This is what I took out. All lesS than two years old. Not my daily driver.
  19. sammybones

    SOLD  Rhino Rack Vortex load bars and AC tray - Atlanta, GA

    Rhino Rack Vortex load bars (Black) fits 2004 100 series and other years i assume, comes complete with 6 legs and 6 base kits - $400 plus the ride Rhino Rack AC Tray (78x52) - $200 this will be tough to ship and recommend local pick up. I suppose i could take it apart and ship it, there are...
  20. sammybones

    SOLD  Sharpsburg, GA - RAM Mount EZ-Roll’r

    RAM Mount for iPad Air. I got a new iPad and this one is too small. You pay shipping and it’s yours.
Back
Top Bottom