I put this in the 40 section for more eyes, but thought I'd put it here in case there are any thoughts about my ol' B engine being the cause of this weird shifting/stalling thing.
BJ40, B engine, swapped in a used H55F, split case, new clutch.
The engine runs OK, a little excess blow-by, a...
Odd problem here, gang. I'll try to be brief and succinct.
BJ40, B engine, swapped in a used H55F, split case, new clutch.
The engine runs OK, a little excess blow-by, a little bit of leaky valve I think, but generally OK. Idles fine, revs fine, doesn't get hot, doesn't smoke more than I'd...
Title pretty much says it all. I did search and found where many have replaced this part, but no details on install.
Is it right to stick this part to the cowl with weather-strip adhesive, or does it just rest there and get pinched in place when the windshield is folded up?
It seems like it...
Merry Christmas all,
03/81 BJ40. B engine. Rebuilt injectors (shop did it, not me), but not the engine. It ran when I started the "resto" (more like a salvage/resurrection of a rusted bondo-monster... but that's neither here nor there), but I didn't pay close attention to the specifics of the...
BLUF: What options are there for new injector lines for an older engine?
In my specific case, I've got an 03/81 B engine with an inline IP. Yeah, the block says 'B', but it has many 3B features - the later oil cooler is one giveaway... - and I cannot find lines anywhere.
- I have seen that...
It seems like these are NLA, but I've had good luck here finding other parts I thought there was no way to, so am posting up to see if anyone has a line on new, or has one from a late-B (apparently the change was 08/80) or 3B. I wouldn't mind paying for an oil cooler too if someone had it...
I put this 'wanted' in the diesel/JDM forum as well, but am hoping for wider viewing here; please excuse the double post.
I want to add a manual glow switch (in addition to/instead of the glow position at the key switch - it's a long, OCD-filled story) to my BJ40 restoration. But if I'm gonna...
I know they're kinda rare (will probably post this up in the general classifieds too for a wider audience, but I'm hoping for more luck here in the diesel specialty sub-thread), but if I'm gonna add a wilson switch I'd like it to be OEM. I have a couple of different momentary buttons that I'm...
I really only *need* the seat mount 'towers' - circled in green (yes, some creative individual cut them off to mount some aftermarket seats.... ).
I might be able to mock something up, but if there's a "part out" out there where the floor is relatively sound, or someone has swapped tubs and...
I had just finished rebuilding my knuckles, and then ran into the not fun of trying to source wheel cylinders for a non-US BJ40. So I bit the bullet - and upon some good advice by respected 'mudders' - and did a front disc brake conversion; these parts are what I replaced and don't need.
-...
I'll keep this brief as I'm in the "I don't know what I don't know" stage of this Cruiser.
- Fourth Cruiser
- Second 40
- Second build thread ('60 in signature line)
- First diesel
I'll be taking my own sweet time on this build, and it will be a bearing by bearing, bolt by bolt effort -...
If I was one to regret things this would probably be one of them.
I let the truck go (good buyer, good deal) and now I'm cleaning out the garage. This should almost cement the future purchase of another FJ60 right? Oh well, my loss is your gain.
All prices include shipping to the lower 48...
SOLD. I'll try to change the post title too, but not sure if I can find the right menu! Ha.
Chasing a starter problem has pushed me over the edge. I think I can stumble my way through almost any repair - see the build thread (HA!), but chasing what seems to be an electrical gremlin (solenoid...
SOLD. THREAD CLOSED.
As with all the other s*** I am cleaning out after the swap and build, I don't think these are conducive to shipping. I'll give it a shot if you're THAT interested but buyer beware, I don't think and item like this will ship too well.
Come and get it and they're...
$20 - or come and get it for free. This is another odd shaped piece that I'd prefer not to ship at all, but if you're paying for the shipping I'll make the effort.
Yes I considered putting all of this in one ad, but I am trying to follow the guidelines and list the item for sale in the...
CLOSING THREAD. SOLD TO LOCAL BUYER FOR PICKUP PRICE.
Or come and get it for free. I'd rather not ship the radiator at all, but…I'll try if you really must have it. The cooling fan, that's easier.
Radiator works (or did 2-1/2 years ago when I removed it and it hasn't been dropped of tossed...
$20 each. I suppose I could ship these so price +shipping or come and get em for free.
CONSOLE IS SOLD
I'LL CLOSE THE THREAD SO THERE'S NO CONFUSION IF PEOPLE ARE SEARCHING A YEAR FROM NOW, BUT SEND A PM IF YOU'RE INTERESTED IN THE NOT-SO-GOOD-CONDITION HEATER. AND IT'S PRIOR TO 3 FEB 14...
PS end cap is dented otherwise pretty good shape.
I don't seem to have the hardware anymore but I'll look around.
As with the gas tank, I don't want to hassle with shipping this - it's yours if you wanna pick it up (Boise, Meridian ID).
Yes I considered putting all of...
The gas tank, come and get it and it's yours for free. Boise/Meridian, ID. I really don't want to go to the trouble of palletizing this or shipping HAZMAT.
I have the vapor tube that fills the opening toward the top front, PS of the tank.
The fuel level sender is being used so not...
I should probably post this up on some Chevy board, but I like 'MUD' and it's my go to so here it is.
I've just about completed the swap and started running the engine a little more - even went for a tentative drive around the block the other day - and I've noticed a not-good noise. I...