Search results for query: *

Forum search Google search

  1. fussy_cruiser

    4 speed tcase will not shift into 4lo

    I just rebuilt my 4 speed tcase, and now it does not shift into 4lo. It shifts smooth into neutral and back into 4hi. I tried putting the trans into neutral and rocking the truck back and fourth. No joy. Part 2: If I have to pull it out and crack it open again, what am I looking for...
  2. fussy_cruiser

    T-Case/Tranny fill hose connection set-up?

    Hose installed. Drilled PTO cover, hopefully leak will stop:
  3. fussy_cruiser

    Insulating the firewall in an FJ40

    I used this: Introduction I used it on the firewall and the doors, works great.
  4. fussy_cruiser

    show me your beige cruiser

    Not a Toyota color, matches ok with Ford beige or tan.
  5. fussy_cruiser

    What have you done to your Land Cruiser this week?

    I bought a DIY hinge from IPOR and fabbed up an insert into the bumper. I am really lucky because my neighbor is a pipe fitter and has dozens of certifications along with a $3000 mig welder. I cut and fit all the pieces, tack weld it, and he burns it in, cost is a case of beer. Works nice...
  6. fussy_cruiser

    What have you done to your Land Cruiser this week?

    Bought a swing out tire carrier bumper from a local guy who makes them. He makes them for jeeps, and uses a really weak hinge. The carrier rattled like crazy and even broke once, so I had to take the tire off of it.
  7. fussy_cruiser

    fj-40 speakers

    I picked up a set of indoor/outdoor speakers from kmart and bolted to the rollbar, worked for 6+ years. I run a softop all year. I think they would sound better if fed by a better stereo unit, mine was $5 from the pick n pull. It replaced a fancier $25 pick n pull unit that was stolen. The...
  8. fussy_cruiser

    For Sale FJ55 Tire rod end set SOR 094-01-G-KIT Colorado

    I do, not much demand for FJ55 TRE's. Thanks, Kirk
  9. fussy_cruiser

    T-Case/Tranny fill hose connection set-up?

    Looking at my SM465 with a 4 speed tcase, the fill plug on the SM465 is on the drivers side, however... It is about 2" higher than the fill plug on the tcase. Is there any issue with running the transmission a couple pints low if I drill and tap the PTO cover to be level with the transfer...
  10. fussy_cruiser

    Transfer Case Leak, SM435 & 4Speed LC transfer

    Replaced the transfer case input seal and still having the same problem after about a month. Could I have a blocked breather? Could I just take it off and see if the problem comes back? Thanks.
  11. fussy_cruiser

    For Sale  FJ55 Tire rod end set SOR 094-01-G-KIT Colorado

    Just like the title says: Specter Off-Road Land Cruiser Parts - Page 094 Land Cruiser Front End NIB, never opened, went Luke's Hysteer instead. $60 plus the ride, I am in Colorado. Thanks.
  12. fussy_cruiser

    Is this right - 4x4 Labs Steering

    I edited the OP. I have to correct the steering more after hitting bumps, than the old steering setup. The only difference (as far as I can tell) is this drag link angle. It was opposite before. 4" lift springs SUA with 1" lift shackles. 6 degree shims to correct caster angle. Not...
  13. fussy_cruiser

    Is this right - 4x4 Labs Steering

    I have the opposite angle from most drag links I have seen. Is this right? Did I create some sort of weird bump-steer situation? The truck is a little squirrley on the street, nothing major, just different from the old steering. edit: Tracks fine, but I have to correct the steering more...
  14. fussy_cruiser

    Toyota tranny or SM465?

    SM465 here, suits the V8 powerband and the Low gear is great off-road because the v8 doesn't produce as much torque as the I-6 @ low RPM's. I rarely used the 2nd gear in the Toyota transmission, would go straight from 1st to 3rd, but that is how the SM465 is set up.
  15. fussy_cruiser

    Leaf spring center bolt size?

    x2, mine has a hex screw. I had to open up the bottom plate a little.
  16. fussy_cruiser

    pitman arm application

    Not sure what other years, but the pitman arm off of a 94 F250 does not work for the GM taper. Looked nice in the junkyard, 1" drop ~6 1/2 C to C, big shaft TRE, but not GM taper.
  17. fussy_cruiser

    GM POwer steering to Jeep gear Box???

    My Saginaw box is from a 94 YJ Wrangler and my pump is from a 1985 Camaro (came with the engine). I went to the pick n pull an pulled hoses and coolers from several vehicles. Mix and match and take the rest back, got $4 back :hillbilly: Seriously, 90% of pre-90 American models used the...
  18. fussy_cruiser

    New 35" tires installed - pics - need fender flares that fit.

    What is wrong with the flares on it? I have TJ flares and I don't like them, have some UB40's I plan on putting on in a bit.
  19. fussy_cruiser

    EFI Harnesses!

    x2. I made my own harness for my TPI conversion. I would have been nice to buy a $1K harness from painless or such, but I only have like 10 hrs in my home-made harness that came free with the engine. Hasn't failed me yet... (knocks on wood)
  20. fussy_cruiser

    Transfer Case Leak, SM435 & 4Speed LC transfer

    Edited the subject line from SM435 to SM465.
Back
Top Bottom