My HDJ81 came from Japan with what I believe are Doninson 3-4" springs, 2" spacers, and Ranchero adjustable shocks. After removing the spacers, caster correction, and a DC driveshaft it's pretty good. With the longer shocks now and shorter springs I have an amazing amount of droop but I'm sure I...
Ok guys. On my last road trip after a few hours of driving my truck had a weird knock. I know my injectors are due so I thought that was it. Well if you saw my post in the fuel tuning thread you know I'm currently driving 1,000 miles home with a bad turbo. Well we pulled into a hotel tonight and...
anyone have a drawing or CAD of the flange to the intake manifold? I want to make an intercooler adapter but don't feel like taking it apart to cut a flange.
Sold sold
I have a new in box set of 850j and 860 springs. If you are looking for springs help me out and buy them because the company is going to rape me for a return. I was going to install them on the truck I just bought because it was too high but when I had the truck delivered I ended up...
So my new truck came with a lift that is too high without proper caster correction. It's a 1990 HDJ81. It looks like about a 6" lift with Rancho shocks. I'm not super familiar with these trucks so take a look and let me know what I have going on here. I wanted to lower it with some OME 850j/860...
Maybe someone can remember and let me know if I am crazy or not. I seem to remember there was a vendor on here with a great deal on a tubing bender with one die. At the time I was not in the market but I remember looking at it. I could also be thinking of a different forum because I cant seem to...
Update: The turbo is on and running but it's not 100% done yet. It has been sitting for a year while I tried to find the time to finish the turbo.
Update#2
I got tired of trying to make my DIY turbo kit work and was able to buy a used kit from the forums. It's not installed yet.
The quick and...
I am looking especialy for the tools to lower the spare. I would also like any other parts that should be there stock but I'm not sure its worth shipping a jack. thanks, please PM me. I'm in Maryland.
Stupid Ebay.Au
I dont know why I torture myself looking at trucks on there but it looks like at least this one can be imported.
1986 Toyota Landcruiser DELUXE 4X4 Factory Turbo Diesel!!!!! 5sp M Wagon | eBay
Vehicle:
Fj62
2H
12v
Two batteries- not isolated
Wilson switch
Factory alternator connected as vacuum pump
GM "One-wire" Alternator connected to driver's side battery
Problem:
My glow relay (ford starter junk) started giving me trouble and I was having starting...
So I have an 89 FJ62 with a 2H and H55. I had a vibration and realized my rear ujoint was shot. When I went to remove the driveshaft with my truck on a lift the shaft was under tension. When I put it on the ground I was able to get the shaft out but I only had maybe 1- 3/8" of slip at the...
Ok I have been searching and can't find my answer. I need a new slave on my H55. I looked up the part number in toyodiy.com but the number was no good in the US system. Is there a US part number I can use for a 4sp 2f slave? I found this napa #31470-60071 but that is on the 40 series board. Will...
My 2H had the stock fuel filter system removed and replaced with a Racor 120 w/ R12t 10 micron filter. Example:
Racor 120A, 120AS, 120AT, 120AP Diesel Spin-On Filter/Separators - RACOR DIESEL SPIN-ON FILTER/SEPARATOR SERIES RACOR FILTERS & ACCESSORIES - All Points Marine
This is my only...
Anyone have any 2H oil pump experience? I got all new gears and crank splines and now I am having a problem installing them. Both pump gears are OEM but when I install the pump cover bolts I cant spin the pump. My manual has specs for between the gears and the housing and then using a straight...
I am so screwed. This engine needs a full rebuild and its just not worth it. I had a post here about needing pistons : https://forum.ih8mud.com/diesel-tech-24-volts-systems/459710-source-2h-pistons.html
I got alfin pistons from Australia, a gasket kit, replaced one rocker arm that was...
Looks like I might score a free GX470 rear diff but I can't find any compatibility info. Is it a standard 8" diff that I ca use in my 62 or are there differences like axle splints that won't work? Thanks