Search results for query: *

  • Users: Bruneti
  • Content: Threads
  • Order by date

Forum search Google search

  1. Bruneti

    MAF Connector Part# ?

    I removed the intake this weekend to snug up all the valve cover bolts. While I had that off, I thought I would remove the air filter housing and spray the MAF sensor with the MAF spray cleaner made by CRC. Upon pressing the latch on the harness-side connector down with my thumb, it broke off...
  2. Bruneti

    VIN check on this Landcruiser

    Does someone have a Carfax (or similar) account that can run a report for me? It would be greatly appreciated. VIN: Edit-Removed Sent from my iPhone
  3. Bruneti

    Part Number for Exhaust Heat Shield from 93-94 Up&Over Frame?

    I'm trying to determine the Toyota Part# for the Exhaust Heat Shield that was used on the 93-94 models where the exhaust pipe went up & over the frame. I understand the mounts are still there on the later 95-97 vehicles. I just want to source the correct part for a future project. A quick...
  4. Bruneti

    Planning quiet exhaust - Is OEM tailpipe section identical between 93-94 and 95-97 models?

    I'm planning out options for what I want to do with my exhaust system. I need to understand if the OEM tailpipe and resonator section is identical between the 93-94 model and 95-97 model. I know the center muffler sections are different because of the inlet routing, but the outlet of the...
  5. Bruneti

    Can tintable raptor liner be tinted white?

    Can the tintable Raptor Liner be tinted to match the nearly-white LX450? Or is the base color of the liner too dark to start with?
  6. Bruneti

    Loose front wheel bearing - help with what could be damaged

    So I experienced a grinding sound from the front passenger side of my 80. Jacking it off the ground and tugging on the front wheel shows lots of play at both 12&6 o'clock, as well as at 3&9 o'clock. It's been about 60k since I last did the front axle service, so it's obviously time to tear...
  7. Bruneti

    Wanted  Need Heater Inlet Y-Pipe for 80 series

    Anyone who has removed or bypassed their rear heat should have taken this piece out. I need the rear heat in Michigan, but buggered up the soft copper pipe while replacing hoses. Pic and diagram of needed part below: Shoot me a PM if you have one available.
  8. Bruneti

    Those of you who have removed or bypassed your rear heat

    I understand this should really belong in the Wanted section, but I will include this bit of tech for those who still use this pipe: BE GENTLE WITH THE PART SHOWN BELOW WHEN CHANGING HOSES OR YOU WILL DAMAGE IT. IT IS COPPER THAT IS PAINTED BLACK. IT IS NOT A STEEL LINE. You must not twist...
  9. Bruneti

    RTH - How to remove dowels at block/head interface

    So the head is off at the machine shop. I've scraped the block to get the majority of the large debris off. I want to remove the 2 dowels to make the rest of the deck cleanup easier and more even. How do you get the dowels out of the block without destroying them?
  10. Bruneti

    RTH - Truck won't get up to normal operating temp

    RESOLVED!!! RTH - Truck won't get up to normal operating temp RESOLVED!!!!!!!!!!!! THANKS EVERYONE!!!!!!!! I had to drive to a seminar for work today. Approx. 70 miles each way, and my truck never came up to normal operating temp. Even after stopping and idling. Weather was...
  11. Bruneti

    Front Wiper Arm Springs - Are they available seperately?

    Wondering if anyone has ordered the springs seperately that pull the windshield wiper arms against the glass. I put new OEM blades on a while back, but never got the performance that I've had on other Toyotas (and yes the blades were sealed in a Mr. T package). The snow is kicking in today and...
  12. Bruneti

    A/C Experts - Advice Needed

    For the past couple weeks I've had diminished A/C performance, as well as some noise from the compressor. The belt has been squeeling as well. So I replaced the belt with a cheapie from Autozone over the weekend, and this resolved the slipping/squeeling of the belt. I then had a A/C...
  13. Bruneti

    Need help with Google Earth Plus in realtime mode

    I'm trying to get Google Earth setup for navigation assistance on a vacation trip next week. I've paid for the upgrade to Google Earth Plus and activated it. I have a decent understanding of how to cache the route data so I don't need a live internet connection. My problem is with the display...
  14. Bruneti

    Real time help needed-Rear Axle Service on my D.D.

    SOLVED *** Real time help needed-Rear Axle Service on my D.D. *****Problem Solved - Thanks!!! ******* I'm performing the Rear Axle service on my Daily Driver and have run into a snag. I've got a '96 LX450 with e-lockers. First off - I did shift into low range and engage the rear locker...
  15. Bruneti

    Wanted  WTB OME 850J front / 863 rears

    Well, it's a longshot. But I'll post it anyway. Looking for used OME springs. 850J fronts or 863 rears. Thanks - Tim
  16. Bruneti

    Does Denso make the OEM spark plug wires?

    Does anyone know who manufactures the OEM spark plug wires for the 80 series? I know the aftermarket Bosh wire kits available from your local parts house have not gotten good reviews, but I was wondering about the Denso's. Their plug wire kit is about half the price of the Toyota kit. I'm...
  17. Bruneti

    Rear Door Lock Actuator - Help needed

    My passenger side rear door never seems to lock or unlock on the first try. It almost always does on the second try. Is there anything that can be done to help this (fresh grease, etc.) or do I need a new lock actuator? If a new actuator is required, does anyone have the Toyota part # or...
  18. Bruneti

    Front Axle Housing from a locked '96 FZJ80

    I have a front axle housing from a locked 1996 FZJ80 (LX450) with 130K miles. It was replaced after being damaged in an accident. It is very difficult to see the damage visually, but it was bent upward and back slightly on the extreme USDS end. This prevents the alignment from being in spec...
  19. Bruneti

    Post Accident Advice Needed

    Well the LX protected our family this afternoon from a car that turned left in front of us at a light. Fortunately everyone involved was o.k. with the passengers of the other car only bumping their knees on their dash. I only wish I could show you a picture of their Neon that we basically...
  20. Bruneti

    Wanted  Wanted: FZJ80 USPS Running Board to replace "Yucky"

    Looking for a US Passenger side running board with the plastic tread step intact to fit my '96 LX450. Minor rust is o.k. as long as it's straight. Not willing to pay big dollars for this, but will definitely pay shipping if pickup is not feasible. Let me know if you're cleaning out your garage...
Back
Top Bottom