Search results for query: *

Forum search Google search

  1. bigredmachine

    Harbor freight welders

    Harbor freight is running 15% off all welders and 20% off for club members, 10/17 is the last day to pick something up. https://www.harborfreight.com/online-promo-2021.html
  2. bigredmachine

    MUDShip  NJ to SC and FL

    Ill be heading down to fl over the easter weekend with a stop in sc on friday. room for smaller items as im taking the corolla. second trip down that way will be the following weeked but ill only be going to sc.
  3. bigredmachine

    Hood latch seized, no problem

    The truck was a bit over due for an oil change so no problem ill get that done in the morning and get on with the day. Oil, check. Filter and crush washer, check. Tools, check. Hood open, not check :bang:. Tried taking the hood release cable off and pulling with a pair of pliers, no change...
  4. bigredmachine

    Standard Horizon (Yaesu) programming software problems

    I bought a standard horizon hx890 portable radio for my boat and the radio has the ability to be programmed with a computer. ive tried downloading the program software from the company website several times and the radio wont connect i just get a timeout message when i try to read from the...
  5. bigredmachine

    For Sale  upper and lower 4runner rear contorl arms in nj

    I have a set of both upper and lower control arms available, both came off of an axle that was swapped. bushings are in good condition, arms are straight and came off of a truck had the axle replaced due to a bad rear. 50 for either upper or lower and 80 for both plus shipping if you want to go...
  6. bigredmachine

    MUDShip  NJ to SC 4/12-4/14

    Ill be driving down to bluffton sc on 3/6 and returning on either the 3/8 or 3/9. ill be taking the corolla so smaller to medium parts only as theres limited space in the car. i expect to go back down again some time in late spring/early summer and ill update when i have solid dates. price based...
  7. bigredmachine

    NAPA eclips calipers on sale

    tittle says it all calipers are 20% off and free shipping to you home or ship to store. fronts are going to run about 55 or so after the cores are returned. https://www.napaonline.com/en/search/brakes/caliper-caliper-hardware/auto-parts/toyota/land_cruiser/1994?ref=homeTopCategoryPod
  8. bigredmachine

    SOLD  Used 28100-31131 starter for sale in nj

    I have a used starter that came out of a 10 fj cruiser that the cust wanted replaced due to mileage. cust was having a starting issue due to a bad battery and decided to replace the starter anyways. starter is clean and tested within spec multiple times, this would make an excellent spare or a...
  9. bigredmachine

    vr diag help

    ill start this off with the regulator is not for a lc but it is a Toyota regulator, its off of a Toyota 2sdk7 skid steer. I figured that this would be the best place to get some info and knowledg. im pretty sure that its fried but just want to confirm that before ordering another one. the...
  10. bigredmachine

    For Sale  235/55/18 bridgstones in nj

    I have a set of bridgstone blizzaks in 235/55/18 that came off a used car and wont fit the wifes new one. tread is almost new on them and they have plenty of life left. asking 200 and would prefer local pick up but can work out meeting or delivering within a reasonable distance, they are also...
  11. bigredmachine

    MUDShip  NJ to Ft.Wayne IN easter weekend

    Going out to see family over easter weekend and well have room in the car going out to Indiana in ft. wayne area with a planed side trip to south bend area. driving out on 4/18 and returning on 4/22. well have room for smaller to medium sized parts and will be driving out along rt 80. pm if...
  12. bigredmachine

    MUDShip  NJ to SC round trip 3/8

    ill be driving down to bluffton sc on 3/8, returning on either 3/10 or 3/11 and will have room for smaller parts only. ill be taking 95 all the way down and will be a ble to take small detours to make deliveries if necessary. pm or email me if interested chairbreaker7@comcast.net thanks aaron
  13. bigredmachine

    For Sale  Tacome block lift kit

    I have a used block lift kit that was removed from a truck that was getting a frame done and the customer didn't want the kit anymore. blocks will give 2 inch of lift and will fit a 05-10 Tacoma, you will need new u-bolts for the rear axle but all other hardware is included. asking 50 plus the...
  14. bigredmachine

    SOLD  100 series/lx470 front hub and bearing

    I have a used set of front hub and bearings that a customer wanted to have replaced. hubs and bearings have 200k miles on them, there were no issues with the wheel bearings when they were removed. hubs are in good condition as is the abs ring. p/n is 43503-69035 asking 100 for both, they are...
  15. bigredmachine

    For Sale  locked third for sale in nj

    I have a locked third that was taken out of an 07 fj cruiser due to a bad pinion bearing with 170,xxx miles on it. toyots p/n is 41110-35b61, p/n shows that it is a 4.11 gearing and will fit a 07-09 fj cruiser and 08-09 4runner. it should also fit a third gen Tacoma as it is the 8 inch rear...
  16. bigredmachine

    For Sale  2011+ BC coilover kit for Sienna

    I have a complete coil over kit for 2011-2016 sienna that was taken off of a customers vehicle. coil over kit only has about 30k on it, kit includes loaded front struts, lowering springs for the rear axle with spring seats and rear shocks. all hardware is included to mount and install the kit...
  17. bigredmachine

    SOLD  1 bfgoodrich all-terrain for sale in nj

    I have one used bf all terrain ko in a 285/70/17 load range e. has some slight cracking in the sidewall with no cracking in the tread. tread depth is about 8/32-9/32, it would make an excellent spare. local pickup is preferred but I can ship on your dime, asking 50 for the tire, pm if...
  18. bigredmachine

    Exhaust manifold question

    So the question is whats the difference between the 93-94 and the 95-97 manifolds? I know that the 95-97 dosnt have the port for the pair valve, that's why I bought them, but I'm assuming that they should just mount right up no problem. I need some exhaust work done and figured that this would...
  19. bigredmachine

    Lokka locker install instructions

    I was able to pick up a lokka locker from a member and wanted to share the locker install instructions. I was unable to find them online and fortunately got all the paperwork in the box. there is a typo on some of the pages, where it says the clearances should be between 6-20 inches :eek: its...
  20. bigredmachine

    SOLD  FJC control arms and panhard bar in nj

    I have a set of upper and lower rear control arms off of an fjc that we did an axle swap on at work. the arms and panhard bar are all straight and the bushings are I good shape with no tares. I'm looking to sell them as a set, both uppers together and both lowers together. I'm looking for 100...
Back
Top Bottom