I have a new project in mind and I have access to 60 series cable locker axles with an OME lift and I want to put them on a BJ75 mine truck. I know it'll be fairly easy to swap the axles, but I want to use the OME's.
I've heard that 60 series OME can be put on a 40 series easily. I also know...
I searched and searched, a lot of stuff about the resistor.
My '97 LX450 suddenly lost all fan settings.
Symptoms:
- the recirculation button is inoperable, it does not light up at all
- The vent selection buttons work and I can hear them changing position (i.e. floor, vent, defrost)
- The...
I've searched, but to no avail.
I'm installing a dual battery setup a la Slee wiring diagram, but I'm not sure where is the best place to take the "alternator good" signal from. Please help identifying the actual wire (color and location) and if I should fuse it.
1997 LX450 USDM
Thanks.
Hey guys, I'm toying with the idea of selling my Canadian BJ70.
The Goods:
- 240,000 km
- 24 volt
- Green (originally black). Good shape and oiled regularly for most of its life. 1st owner had it for 20 years.
- Left Hand Drive
- AXT Turbo
- ARB lockers front and rear
- 4.88 gears
-...
My diff breather union snapped at the breather hose.
I need help with replacing the rear differential breather union. It's the male threaded piece that screws into axle housing and clamps to breather hose.
The Toyota part number is 90404‑10018, but it is difficult to find. The BJ75 part...
The guys a 4wheelauto screwed me over with the wrong tach sensor for a BJ70. Then I had to hound them to get answer and still nothing. Finally when I threaten to call them out online and I got a response. But not the one I wanted.
They have no ideal what customer service is. I strongly...
Hey guys,
The wire for the RPM sensor on my '86 CDM BJ70 was nicked really close to the sensor head. The RPM gauge started jumping around and eventually died.
I couldn't create a solid repair so I tried to lengthen the wire by soldering on another piece close to the head. Well no luck I...
Do to the lack of one fuse and a short to the main 12V power line from my 3rd battery I had a small vehicle fire that melted through my ARB air lines. I'm in the process of finding out what the airline size is to find replacement lines.
For future reference, what is the best field repair for...
I wasn't sure what the proper term for the back of axle tube Birf bulge that the wipers are supposed to keep clean.
I'm rebuilding the axles and replacing the wipers and I noticed quite a bit of rust/pitting on the back of the axle birf bulge.
What is the best way to remove the rust, or is...
I've searched the forum and come up with the following:
- Adjust LSVP
- test / check vacuum
- check for leaks
- use quality parts for replacement
- 4runner calipers and master cylinder will fit a BJ70
Here is my question.
Are 4runner calipers bigger and better then BJ70/60 front...
I'm nearing the completion of my AXT turbo kit on my 1986 CDN BJ70. The exhaust pipes supplied with the kit are much bigger then my stock pipes, so I'll be heading to the muffler shop for a 3" mandrel bent system.
So my question is, where is the best place to route the exhaust?
From the...
I did the search on 24 to 12 vdc charging and I just finished the wiring, connections, terminations.
What I need to know is how a 12.06 VDC output of my 24/12 converter will charge my 3rd (12 volt system) battery?
The max charge on a batter is around 12.8 volts. my 110 AC to 12 VDc battery...
I'm learning how bad a previous owner can fxxx up a vehicle when he doesn't know anything about it or his mechanic can't get parts.
Highlights
- Previous Owner (PO) thought it was a 1985 BJ60 with a 3.2 six cylinder
- Turns out it's a 1986 BJ70 (24 volt)
- Radio, alarm, and 12 volt power...
For some strange reason 1991 JDM HDJ-81 only have lap belts in the rear seats. I need to put newer style shoulder belts in the back for the kids booster seats.
Before I tear apart teh interior, does anyone know if there are mounting factory points for the retractible belts and shoulder...
Well, being cheap has it's draw backs.
After cleaning out the garage the other day I found a 3/4 empty old diesel fuel tank. Since I needed to drain it to throw it away I decided to put the fuel into my cruiser.
Well, not too many km's later my cruiser is doing the funky chincken with a...
Hey Guys, I'm back on mud after a short time being landcruiserless, 2 kids, and a job that consumes all of my other time.
I just picked up a 1991 HDJ81 with a manual transmission and factory electric lockers.
I'm looking to understand what transmission I have and if it has anything in...
Hey guys,
I've been a long time USDM 80 series owner, since I sold that I'm looking to get a diesel cruiser. The one I'm looking at is a JDM BJ70.
I've seen some CDN 70's, but they are either rusted with mega km's or crazy $$$. The BJ70 I'm looking at is an '89 in excellent condition...
Hello All,
Did some resaearch and I think I got it, but please give me your insight.
I'm looking to buy a JDM HDJ-81 with a transfer case (H2A) noise. I'm planning on swapping the t-case with a local 1997 FZJ80 (H2AV) unit.
I've read that the drive shafts are different sizes. Can...
Last night I heard the words from my wife that I always dreaded...
"What does it mean when the oil gauge thingy is on "L" and the oil light comes on?"
Short Story
Wife comes home and oil level is ZERO! Look under the truck and oil is splatered everywhere on underside. I fill up with old...
Calling all Canucks looking to make themselves a set rear drawers!
Princessauto has a surplus of 36" heavy duty dual action drawer slides. They extend 20" one way and 21" the other and can hold 115 lbs per slide.
At only $19.99 CDN/slide.
In the summer I was lucky enough to stumble on...