Search results for query: *

Forum search Google search

  1. mmm635

    ARB 4" Bumper Fog Light LED Upgrade

    I ended up using the Morimoto in my setup - wiring is simple +/-. If you decide to go with the Stedi, I still have the new ones at my shop if you are interested.
  2. mmm635

    LX470 Speaker Replacement

    My '05 has JBL GX608C 6.5" on all four corners with a Kicker 10" enclosed sub in the rear (all from Best Buy). The system sounds pretty good, but is ultimately limited by the head unit. The tweeter location in the rear doors really helps to increase the mids and lows even while sitting in the...
  3. mmm635

    Mud flaps for ARB rear bumper?

    I used an extension for the trailer socket.
  4. mmm635

    Mud flaps for ARB rear bumper?

    You can always cut the original mud flaps to work with the ARB. There is a distinct line you can make the cut to get it to work.
  5. mmm635

    Front Speaker Crossovers

    The crossovers are matched to your speakers. The cutoff points on the factory speakers are not the same as newer aftermarket speakers. On my '03 I used external crossovers all the way around and it sounds proper. On my'05 I did not use the external crossovers provided up front and it does not...
  6. mmm635

    Front Speaker Crossovers

    I need to find the pics of my front doors, but here are the rears dismantled. You will get the idea of how to mount the crossovers for the fronts.
  7. mmm635

    Torsion bar adjustment procedure.

    You need to use a 24mm wrench that is pretty thin and it slips in on the top side in the gap. Harbor Freight sells a set pretty cheap.
  8. mmm635

    ARB Combo bumper and Smittybuilt 12k winches

    Yes...you will need to clock it 90 degrees. It is a very simple process. Unscrew the 4 bolts, lift and turn, tighten 4 bolts if I remember correctly.
  9. mmm635

    Borla 14814 Exhaust Install with Pics and Notes

    I took a few pics during my install...2003 LX470 Borla Install Pics
  10. mmm635

    ARB Combo bumper and Smittybuilt 12k winches

    If one has a functional purpose for the Rigid's, then the price is justified and are worth every penny. They are high quality - you won't regret it.
  11. mmm635

    ARB Combo bumper and Smittybuilt 12k winches

    Below are some quick pics I took on the way home last night. The pictures don't do the light output any justice. Low Beam only... Low Beam/Fogs Low Beam/Fogs/High Beam Low Beam/Fogs/High Beam/Rigid Spotlight Rigid Spotlight...
  12. mmm635

    ARB Combo bumper and Smittybuilt 12k winches

    They are pricey, but very badass! It is amazing how far these can throw light in a straight line which is perfect for my setup. My HID lows, LED highs, and LED fogs take care of everything up close, and the Rigid's take that intensity within your field of view and casts it further than you can...
  13. mmm635

    ARB Combo bumper and Smittybuilt 12k winches

    Correct. Mine are the Hyperspot version - there are 15 +/- versions of light pattern for this light.
  14. mmm635

    Exhaust Question

    This is a cold start at 95 degrees...
  15. mmm635

    Exhaust Question

    I don't have the Magnaflow 49422, but I do have the Borla 14814 and it is worth every penny.
  16. mmm635

    Torsion bar adjustment procedure.

    My OME torsion bars were similar - I had to crank the driver's side quite a bit more. Anytime I adjust my torsion bars, I get a 22mm and a 24mm wrench and loosen the lower control arm bolts. This will allow the bushings in the lca to rotate freely until final ride height is reached. Then, I...
  17. mmm635

    Iron Man Pro Foam Review

    Check my post above with the updated pic. I was incorrect - went out and double checked. The logo should be facing forward which makes the shorter side where the bolt head is located, not on the chassis side. The lower pic in my post above is the incorrect installation. I had the same...
  18. mmm635

    Iron Man Pro Foam Review

    It goes on both ways. However, the proper way is for the shorter side to bolt onto the chassis to eliminate any interference with the mount when the shock articulates.
  19. mmm635

    Front sway bar orientation

    That is correct.
Back
Top Bottom