i live it cleveland tennessee i know of a 2wd truck been sitting for at least 3 years 22re is complete guy says it needs fuel pump $400 for the whole thing
well i got new clutch and everything in there tranny bolted up hole relocated for transfer case shifter. with the original crossmember bolted to the new w56. talk about a tight fit with the cross member all the way against the bottom of the frame the top of trans is hitting the tunnel i think we...
from 79 to 83 toyota made a l series tranny in which the bellhousing and tranny housing were one piece you could not remove the bell housing OLD SCHOOL! but cool i love old stuff
yea its a pre 84 tranny non removable bellhousing i like the idea of the bracket that downey offers but wouln it put to much weight behind the crossmember and cause the rear of the tranny to droop i run a CNC waterjet at a machine shop it would be easy to duplicate
hey guys im swapping my g series tranny in my 83 yota to a w56. how or what do i need to do to relocate my crossmember for the added length of the newer tranny? any help would be greatly appreciated thanks
i see alot of pre made winch bumpers that compaines offer the years that they fit are all 84 and up does any body know if the 84 and up bolt pattern on one of these would be the same as my 83 before i spend a few hundrew for nothing?
hey guys i ran across an older warn 6000lb. winch i went to look at it the guy said it worked. we hooked it up to a jumper box and nothing seemed to work. im not real sure we knew what we were doing but any way its an older model with a black knob to engage or disengage. he wants $100 for it as...
i am wanting to change my gear lube. i have a 01 taco v6 w/locker the owners manuel says hypoid c is a synthetic compatible with this? sorry bout the rookie question
83 toy 4cyl 5 speed stock started replacing rear wheel cylinders noticed alot of what appeared to be grease everywhere on passengers side pretty sur seal is leaking. i have never done this before and want to make sure this job is not out of my league. should i replace everything while im in...
i have an 01 taco 3.4 check engine light came on went to local auto zone TPS sensor, TPS sensor circut A were the two codes. what i need to know is ... can i just remove the old one and replace it with ease of is there a bunch of stuff that is going to fly apart when i pull it out. also do i...
im about ready to regear and lock my toy i decided on 4.88s im runnin 32s now 35s later but not sure about lockers front? or rear?
i can only afford one righ now looking at detriot locker or true track.
what is a soft locker and how is it different? help me make a choice......:mad:
iv got an 83 thats identical to the one you have lucked into except for a little more rust. bought it from a guy i worked with for $1000. he was the original owner 295k when i got it i would take a bullet for that truck. what brand is that winch bumper been lookin for one like that