(5) 15x10, 6 on 5.5", 3.5" back spacing, Land Cruiser hub cap clips, galvanized steel wheels. (2) front hub caps, and (2) rear hub caps. The wheel haven't had tires mounted on them. $250 located in Poquoson, VA 23662. I am going to Rausch Creek in PA Jun 24-27 and I can meet up on the way...
Wanting to borrow a 4.10 3rd in the Denver/Moab area.
Here's the story, going wheeling in CO and Utah. Found a vehicle I'd like to get home on the way back to Virginia. Thinking of putting it on the trailer and driving the 40 home, but with 4.88s it'd take forever. So if I swapped a 4.10...
Advance adapter outside frame rail headers P/N 717006-HDR, never installed, slight surface rust, no dents. $150 O.B.O. plus shipping. Located in Poquoson, VA 23662.
PaulC
Transmission and transfer case pulled from a 1985 FJ60. Located in Poquosn, VA 23663. $350 or O.B.O. Comes with transmission shifter and tunnel cover with transmission and transfer case shifter boots.
PaulC
This poor neglected FJ62 has been sitting, at my friend's shop where he works, for about 3 years in Williamsburg, VA. I asked the owner of the shop about it, and he said the owner has moved down to North Carolina. Please get a hold of me or let me know if you own it or know who owns it...
Used 80 series RHD double ended steering arm. $75 shipped to the lower 48.
SOLD-Slee Off Road DIY front track bar adjuster. Used. The adjuster was welded in, but only used for mock up. Ended up going a different route with the front suspension on my 40. $50 shipped to the lower 48...
Sold!!!!
1983 FJ60 axle complete hub to hub/drum to drum.
Front axle fine spline 3.70 gears, open diff. Aisin locking hubs, welded on ring gear guard on housing. Rebuilt knuckles (all new bearings, seals, Marlin axle shaft seals and felts). New pinion seal. Rebuilt calipers and new pads and...
FJ60/62 dual swing out rear bumper. It has two d-ring mounts go through the main channel (1/4" thick 2x4) and are welded on both side. Mounts to where the original bumper mount brackets were and two bolts per side on the under side of the frame. The quarter panel bars (1.75" dom .120 wall)...
Denver, CO to Richmond, VA empty trailer Aug 11th.
Just as the title says, coming back with an empty car trailer on the 11th of Aug. Just help out with the gas.
PaulC
*SOLD* Front axle disc brake parts. $200 Williamsburg, VA
*SOLD* Front axle disc brake parts from a 1976 FJ55. Knuckles, spindles, birfields, backing plates, asian locking hubs, hubs, calipers (good for cores), caliper hard lines, spindle nuts, steering arms, all mounting hardware. $200...
Did a search for flipping the tie rod on top of the steering arms on a SUA FJ60, couldn't find what I was looking for. Ultimately I would like to get steering arms made with the same drop as stock steering arms but with 2 tapered holes (1 for the drag link and 1 for the tie rod) from the top on...
Heading out from Williamsburg, VA (23185) on or about the 24th of July going to South Bend, IN (46628) and coming back on or about the 31 of July.
PaulC
After changing the distributor o-ring, front crank seal and oil pump seal to finally comes down to changing the oil pan gasket. I really didn't like the idea of taking off the fan, loosening the motor mounts and lifting the motor so I did a slight modification. Just cut the track bar cross...
SOLD.
SOLD. Colorado Offroad Express adapters and NP203 gear reduction box for a FJ60 H42 (up to '85) to 19 spline split transfer case. The NP203 box has new bearings, seals and a North West Fab PTO cover plate with a fill hole. Assembled but never ran. Will send the cut main shaft from the...