Search results for query: *

  • Users: SARCruiser
  • Content: Threads
  • Order by date

Forum search Google search

  1. SARCruiser

    M416 buying advice wanted

    After some discussion, my wife and I have decided to look for a M416 or M101 Canadian to use for camping. Ultimately, we plan to modify it into an expedition-type trailer but that will be a slow-ish build so we want it to be something we can use as I work on it. I have found a couple M416's...
  2. SARCruiser

    For Sale  [CO] FJ60 seats, center console, OEM birfields

    I'm moving and really don't want to move these parts! Price for all of the below: $cost of shipping or your gas to pick them up I'm in Fort Collins if you are interested in pickup/meeting. These are the OEM front seats from my '87 FJ60 with the gray interior. These DO NOT include the...
  3. SARCruiser

    For Sale  (CO) DIRT CHEAP 2F parts

    Here goes: All parts are off an '87 FJ60 2F with about 200k at the time they were pulled: Head with rocker assembly (no cover but I'll throw in the original head bolts if you want them) (good working condition when it came off the truck) - SOLD Pushrods and lifters (good working condition...
  4. SARCruiser

    Diff sludge removal

    I have a boatload of parts showing up today from Marlin, Longfield, etc for an axle/knucle replacement and rebuild. Prior to killing a birf the last time I was wheeling, I had known for a little while that my inner axle seals are bad (Marlins will be going in). So I have that wonderful grease...
  5. SARCruiser

    OME nitrocharger lifespan?

    I've had my OME heavy/heavy lift with the stiff shocks on for about 25k now. About 1/4 of that mileage has been wheeling of various sorts. The last few hundred miles I've started to notice a front to back wobble when coming to a stop. Basically, I can see and feel the front end bob a few...
  6. SARCruiser

    For Sale  FJ60 Rear seat heater

    I pulled this when I did the V8 swap since I decided not to re-plumb it. It worked great when I pulled it. The inlet/outlet tubes got tweaked a little pulling it out but they do not appear to be cracked and should function just fine. It is for 12V systems. I'm asking $20+shipping. Thanks...
  7. SARCruiser

    Weber to stock air cleaner adapter - $15 shipped

    Found this cleaning out my garage. Not even really sure why I had it in the first place since it's for the 1F air cleaner. Take it off my hands!
  8. SARCruiser

    For Sale  [CO] 2F Factory Service Manual - $40 shipped

    As the title says, I'm selling my paper copy 81-87 2F Factory Service/Repair Manual (FSM). I purchased this from SOR about 3 months before I decided to pull my six so it is lightly used. All pages are present and intact. :cheers:
  9. SARCruiser

    For Sale  [CO] 2F engine parts

    [CO] 2F engine parts - Make and offer! EDIT: ALL OF MY PARTS FROM THIS ENGINE ARE GONE I'm finally cleaning out my garage and am parting down my desmogged 2F. It came out of my '87. It was not the original engine (PO blew the original). This engine had about 180k on it when pulled. Parts...
  10. SARCruiser

    Local ARB installer?

    I finally picked up some 33's, gears and an air locker for my cruiser but now I need the locker installed. Usually I'm all for doing stuff on my own, I just really don't want to mess with the diffs. I checked ARB's site and it looks like the closest dealers who do installs are down in the...
  11. SARCruiser

    Where to get drive shafts?

    Is there a good place local that can modify drive shaft length and/or fab new drive shafts? I'm willing to go as far as Denver to get this done. I'm just wrapping up my 5.3 Vortec conversion on my 60 and the drive shafts are about the last thing I still need done. Thanks in advance!
  12. SARCruiser

    For Sale  2F parts and engine - Northern CO - will ship most parts!

    All of the parts listed here are used and have come out of my '87 FJ60 while I've been doing my Vortec swap. All parts were fully functional (unless noted otherwise) when removed. 2f long-block w/o accessories (needs head gasket and rear main seal) - $250 Factory air cleaner (does not...
  13. SARCruiser

    Vortec time for the SAR guy :-)

    On my last camping trip, I made the wonderful discovery that the headgasket in my 2F is starting to go. While I could just dive in and replace the gasket, this engine is getting tired and could probably benefit from a full rebuild and with how I use this truck, that just doesn't make a lot of...
  14. SARCruiser

    Missing something important!

    I popped off my valve cover to do my first valve adjustment over the weekend and noticed that valve 12 all the way at the back of the engine by the firewall had some seriously excessive lateral play in it. Looked a little closer and noticed that the rear retaining spring and clip that are...
  15. SARCruiser

    Stereo dies when brakes pressed and periodically dead battery

    So... this issue has had me scratching my head for the last couple weeks and I'd like to try to get it resolved soon if at all possible. Sorry for the longer post but thanks for taking some time to read it and give me your ideas! It started a couple weeks ago when I was out doing some winter...
  16. SARCruiser

    Help me identify these sliders!

    I found these up on my local Craiglslist for what I think is a good price (which is why I'm not posting the direct ad link ;-) ) but the seller doesn't know what company made these. I'd like to know the make before I fork over cash and find out they're junk. Anyone recognize the make of these...
  17. SARCruiser

    PSA: Mis-boxed *aftermarket* thermostats

    It appears that a batch of 2F thermostats from Standt and NAPA have been mis-boxed with the wrong temperature rating. I've been to three different parts stores (NAPA, Auto Zone and Advance) and called a fourth (Checker) trying to track down a 190-195*F (88*C or 90*C) thermostat. All of the...
  18. SARCruiser

    Coolant system/heater problems

    A few months back I drained my whole coolant system to do some pre-winter work. I installed a freeze-plug style block heater and flushed my heater core with muriatic acid. I made sure to rinse the hell out of the core after the acid went through (ran the water hose through it for a good 15...
  19. SARCruiser

    My $90 seat upgrade

    I've been looking for a while at getting some new seats (my driver's side was missing half the upholstry and rapidly loosing foam). Couple weeks ago I get a text from my friend that he's parting out his wrecked '97 Firebird for everything it's got except the engine and transmission. I asked...
  20. SARCruiser

    PS gear box rebuild - couple questions

    My PS gear box has finally started leaking. It appears to be leaking from around the pitman arm area. I bought a rebuild kit for it about 6 months ago when I put my saginaw pump on because I figured the extra pressue would cause it to go eventually. I really would like to tackle this myself...
Back
Top Bottom