After talking to several upholstery shops and getting quotes to re-do my front seats ranging from $1500-$2200, I decided to take a chance on some cheapo covers from Amazon. Obviously not real leather but initial quality is pretty good. Had to remove armrests but fitment is quite good. Color...
I've got a stock choke cable from an FJ60. Should fit all years of FJ60's maybe some 40's. It's in pretty good shape, handle assembly is great. It has a couple of cracks in the plastic sheathing but it shouldn't affect performance. Looking to get $20 shipped. Thanks.
Long story short, the blower motor has not ever worked in my rig. I tore the old one apart and cleaned everything up... still a no go. I checked the resistor in the side of the heater box assembly and even swapped it for a different. Still nothing. I checked the breaker that is under the fuse...
BUILD THREAD HERE
https://forum.ih8mud.com/60-series-wagons/258496-elliotts-buildup-semi-resto-60-a.html
Things are changing a bit and I am considering moving to a condo downtown. Obviously, I will lose the privilege of having a 2-car garage to myself in the suburbs and I don't want to worry...
I know this has been covered multiple times but my particular situation is a bit different. I tore out my dash (again) to replace my heater core (:mad:) and I am trying to now wire in some tunes. I have a run-of-the-mill Pioneer head unit and am trying to figure out how to run it.
The original...
I need the dome light assembly for an FJ60. Mine is broken. Preferably the entire thing, including the cover. I already have bulbs so I don't need that.
I also need a speedo cable (new or used will work) that is in good condition. Let me know if you have any of this stuff laying around. Thanks!
I was first in line to pick up an ARB winch bumper for the 60 but the guy flaked out on me. So I am looking for a custom front (ARB or otherwise) for the front of my rig. I don't really care about it having a winch mount but it would be nice. Anyone got a line on an ARB for a 60 series? Or maybe...
First of all, this is a continuation of this writeup...
https://forum.ih8mud.com/60-series-wagons/110746-high-beam-lights-fixed-finally.html
I followed screwbirds directions and it worked perfectly. Most of you cruiser guru's probably won't need this but this might help those new to...
I have for sale a hitch from a FJ60. It attaches to the underside tire carrier crossmember and the rear bumper brackets. I have the two bolts on the crossmember side but not the rest. It is chrome and in pretty good condition. A little scrubbing would take off the crud. $20 plus shipping.
I...
So I am trying to finish up my rear axle build. It's got all new shoes, wheel cylinders, e-brake bellcranks, and I am trying to get it set up right. I was going to have the drums turned but the shop recommended against it as they had been resurfaced to the maximum amount already.
Whatever, it...
Hey guys,
I am needing some front and rear spring pins. Not the shackle side but the other side. (see pic) Preferably I'd like to get 4 of them and greaseable, but if you only have one or two I'll take whatever you have.
I'm also looking for (2) emergency brake bellcranks. Mine were so seized...
So this is perhaps the longest knuckle rebuild ever, but I was cleaning the frame, axle, rebuilding EVERYTHING, etc. I just had a couple of questions before I get everything bolted up.
-Is there a way of buttoning up the rotor onto the spindle without getting a 54mm socket?
-Also, once...
So I am ready to bolt most of my stuff back up after the knuckle/suspension rebuild on the front of my truck. I purchased the '94 4runner calipers and rotors but I think I may have the wrong rotors. There are no bolt holes to attach the hub and the ID of the rotor is slightly smaller than the ID...
I bought these for my 60 project but I'm thinking it would take too much to make them work. They should work on other Toyotas though, as long as your hub will pass through the center cap hole.
The wheels are in perfect condition, tires are at about 50%. Here is the CL ad.
(4) 17" Nissan Titan...
So I am picking up a set of Nissan Titan wheels. Same bolt pattern, backspacing will be corrected with a set of 1.5" spacers. The problem lies in the opening of the wheels for the front hub. I would obviously have a machine shop tackle something like this. But what is the general consensus of...
I'm plowing through this nasty stinking job and I'm at a stand still. I have gotten to the point where I am trying to pull the steering arm and lower cover. I have gotten nuts and cone washers off but am having trouble pulling the steering arm itself. Is there a special procedure? I've tried...
I'm having some issues getting my 2F to come to life. I recently replaced just about everything on it during a huge rebuild. New plugs, wires, recurved distributor, rebuilt head, rebuilt carb, new PS pump, all desmogged, etc.
Anyway, I've gotten her all hooked up and am trying to turn her...