Search results for query: *

  • Users: micky
  • Order by date

Forum search Google search

  1. micky

    Engine cuts out under load. search fourm tool useless

    i recently installed a HEI distributor on my 2F and all runs well. revs great and feels like i could pull the world and moon behind it until i hit about 2600 rpm in 4th gear. about then any grade in the road or a fly farting on my windshield causes the engine to crap out. i have checked...
  2. micky

    Your best Bush fix

    busted a tire off a 67 gladiator. fell a tree, and used bailing wire to attach it to the bottom of the axle as a ski. made it back to the shop. (we were on private property)
  3. micky

    cool find at the wrecking yard

    well i pulled a harness out of a 78 pickup with the intention of using it to build a new one for my 76 fj 40. well it looks like more trouble than its worth but i did get all the electrical connectors i needed including the ones that go on the back of the instriment pannel and in the back of...
  4. micky

    Weak Braking; suggestions?

    what i did is swap over to the taco master and booster. that fixed my problem wich was simalar to the one you discribe.
  5. micky

    exaust wrap on header

    is this a good idea. i couldent find anything about it on here.
  6. micky

    Best way to deal with rain gutter rust?

    a replacement would be the best. there are fiberglass tops out there somewhere. if you know how to weld and can replace it yourself coat it in something. white tinted bedliner maybe. i have had great luck with a product called "ZERO RUST" and it comes in a rainbow of colors.
  7. micky

    can't get bloody ring gear bolts out - ideas?

    5 foot cheater bar if no impact gun.
  8. micky

    So my wife told me these were the ugliest things...

    i had the same idea. keep them.
  9. micky

    axle houseing cleaning

    gasoline works pretty good as a degreaser. its far cheaper than the canned stuff too.
  10. micky

    Webber carb

    i had a weber 34/34 and ended up haveing the asian carb completly redone. new bushings around the butterfly valve shafts fixed the majority of the origonal problem i had with it(cost me 200 or so). my weber carb sits in the corner and i beet on it with a hammer when things dont go well for me...
  11. micky

    radiator seem leakage/maybe weld??

    it is EXTREMELY tough to weld brass or even aluminum that thin. you are better off soldering it. try some stopleak first but not too much or it might become stopflow.
  12. micky

    FJ 60/62 Truck Security Ideas?

    one idea i have had is to plum in a plug between the wireing harness that i can remove when i want to leave my rig unattended for more than a couple hours. this would make it so that nothing has power and the thief would have to basically rewire your rig. another idea is have a plug under te...
  13. micky

    roll cage

    i am considering building my own roll cage as a summer project and have a few questions. 1. does anyone have a blueprint for one they built? 2. are there any problems i might run into. 3. what sort of material did you use. (im thinking 2.5"x1/8 wall mild steel)
  14. micky

    Clutch is shot....what else should I do while in there?

    the biggest time saver when doing this is insureing the clutch is installed the right way. i found out the hard way there is a worng way.
  15. micky

    wheel bearing cost vs quality

    last time i did my wheel bearings they cost 25$ a side at autozone and today at carquest they cost 65$ a side. how much do you pay for your wheel bearings and do spendy ones last longer?
  16. micky

    silicone removal

    normaly you can just peel it out without destroying the paint. if its seam sealer then its a bit tougher, i had luck with a putty knife and hook razor. be careful and good luck.
  17. micky

    Axle question

    i am about to start driveing my 40 again. i have completly redone everything on the rig other that the axles. they sat for a year but seem to work fine now. i have checked gears and replaced fluids is there anything else i should do before makeing it my DD again?
  18. micky

    Almost stolen 1972 last night!

    you might want to look into locking the seat foward so someone cant sit in it.
  19. micky

    IPOR wireing harness

    has anyone used this harness before? 15 Circuit Wiring Harness [AAW-500703] - $349.00 : Iron Pig Off Road, Toyota 4WD experts
  20. micky

    What have you done to your Land Cruiser this week?

    finnaly i can post on here. installed a bumper i made a few years back. its 2x4x1/4" wall chromoly.
Back
Top Bottom