1993 Toyota Landcruiser with 158K miles. Had been well maintained. Frame is bent up front. It has been pulled fairly straight and I have the frame machine measurements but it started to buckle so we stopped. Not street repairable but still very drivable with minor repairs. Selling as a trail rig...
1993 Toyota Landcruiser with 158K miles. Had been well maintained. Frame is bent up front. It has been pulled fairly straight and I have the frame machine measurements but it started to buckle so we stopped. Not street repairable but still very drivable with minor repairs. Selling as a trail rig...
I was able to get State Farm to recognize that my 93 with 156k and slightly built warranted "special" evaluation. They recognized its rising value. Took 5 weeks but was able to get 16k for it totaled. A rising classic for sure if maintained. Just Paid 6500 for new to me clean 200k mike...
I have complete 93 front differential with factory new e locker that I want to put on my new to me 97 truck. The 97 has the elocker but I had just had the 93's completely rebuilt from calipers to locker and birfs before totaling it. So at 200k miles on the 97 and the need to rebuild one of the...
do you have to change anything other than the springs if you do this swap to J's? I thought you would have to change other parts as well.... (caster correction bushings being a given on either lift...)
KK
Sand can and did destroy my birfs... If you have leaking birfs fix them before you inject sand into the mix. Other than that you will have no issues. I run about 18psi on loose beach sand. You can run on street pressures but you will feel a lot more comfortable at 18psi. I have never needed...
I must agree, take them back where you got them and get the NGK's. I tried some after market plugs at one point and went back OEM with in a week. Can't say why it matters so much... BUT IT DOES.
KK
Yes I did mean the front of the truck by "front end"... I can't tell where the noise is but I would say its more drive line oriented. Not eng. There is no noise from the eng bay with out being in gear and driving at speed. Heavy acceleration brings out the noise. And it does change pitch or...
I had last posted that I was going to try and do one of the ROTW deals but instead I got stuck doing maint. My front difs were leaking a bit but figured they would be good enough for a couple months. WRONG! I figured I better top off the front diff and went to check level only to find an...
15 min job. You might as well do the dryer while your at it..in case moisture got in.. another 15 min... then pump either r12 or r134a back in. your done...
KK
I had this issue last year... AC was out all together. Got a replacement unit on-line... It is not an uncommon compressor. My leak was at the top plate off the compressor. I knew that going into it but figured I would replace the unit while I was at it. What a mistake. I did all that...