1997 Collectors Edition w/180,000 easy miles.
Totally stock with 1 exception....Landtanks MAF mod.
All PM's with Mr. T's hardware including brakes front and rear,
rotors and calipers, new AC compressor, recent starter rebuild.
HG not done, truck has been babied, never off road, never towed...
I've searched for two hours and can't find the answer to a simple question ie: Is the LSPV lever that attaches to the rear axle straight or does it have a big bend in it (like mine)? I just replaced worn out rear pads and the fronts have very little wear. My LSPV obviously needs adjustment and...
Can anyone give some advise on changing the drier on a '97. I have a mechanic friend who's telling me I have to basically take the front end apart. I have searched.....no joy, and my FSM is on a dead laptop.
Something a little different this time......Both my rear door power windows stopped working at the same time. Any wisdom on this one or do I just start pulling em apart and checking everything? I already checked the lock-out button.
I've searched and read all the posts on 80 brakes.
I just finished replacing all four rotors, calipers and pads as well as rebuilding the e brakes....all Toyota parts. While bleeding the system, the pedal became very soft and would travel all the way to the floor with the bleeders closed. I...
I'm replacing brakes on 97 FJZ80. Front went in fine...new rotors, pads and caliper rebuilds...thank you CDan. Moving to the rears, how do you pull the hub/disk? FSM says "remove disk"...mine won't budge. I tried using two bolts in the threaded holes but don't want strip or damage anything. How...
Can anyone point me to a write up on rebuilding a H55F tranny. I have searched and found lots of info on installs but nothing on rebuilds. I have the FSM.
Can anyone point me to a write up on rebuilding a H55F tranny. I have searched and found lots of info on installs but nothing on rebuilds. I have the FSM.
Also posted in 60 forum.
Has anyone tried this kit or know anything about this company?
TOYOTA LANDCRUISER 80 SERIES PART TIME CONVERSION KIT - eBay (item 140334148229 end time Oct-16-09 17:17:13 PDT)
I'm servicing the rear hubs on my 40 for the first time. The rear is non-USA full floating. I pull the axle expecting to see to see the lock plate setup that I know and love......instead I have this......a 54mm nut with a seal pressed into it and another 54mm nut below with two allen head...
I have a '97 FZJ, stock with 124K on the clock. I have new rotors and pads on my to do list because PO did pads only @ 100K....I don't know why. Several days ago while cruising down the highway the steering wheel started to shake. Speed didn't matter and the brake pedal was stiff and pulsing...