And by properly I assume you are meaning they have their own sealant to use. It needs to have sealant. You can use polyurethane roofing sealant. Toyota recommends sikaflex 256HV
https://forum.ih8mud.com/attachments/inst-pdf.390538/
Crazy how similar they are. A little history from Wiki...
The Type A engine was Toyota's first production engine, being produced from 1935 through 1947.
This engine was a 3,389 cc (3.4 L; 206.8 cu in) pushrod, overhead valve, 6-cylinder, three bearing engine copied from the 1929–36 Chevrolet...
I also do not like how dim everything gets but prefer driving with lights on so I deal with it. The climate control (A/C button mostly) and the clock are the things that I would like to see brighter, especially with sunglasses on. Would be great to bypass the dimmer or something just never...
Mine used to be super strong until I drove off in low with it engaged. All rebuilt but cannot get it back like it was. Either loose or too tight... sounds like adjusting it so it rubs some and drive it a bit is the next step? Hopefully wear it down a tad and then the adjuster will put it in...
Choke is manual, cable operated and should come from the engine side of the carb. There should be a clamp that you can secure the cable sheath on the carb and then the cable attaches to this bushing with the screw in it to secure the cable. Take the air cleaner off the carb and move the...
1. should align
3. the sill should be sitting on body mounts and be spaced the thickness of the mount. you want the sill (long part) in there when checking the fit of the cap I would think.
Lots of good info here...
https://forum.ih8mud.com/threads/another-rear-sill-repair-by-a-novice.876112/
I bought the other hump from Iherna... it has made it to the local UPS center and should be delivered today.
I am grateful for the good experiences I have had buying stuff on MUD... it is always a little nerve-racking sending money with nothing to really have as proof of purchase. Hope you...
Does anyone sell rear quarter panels with the hard top lip? Heritage/Iron Pig used to way back but don't recall seeing any lately.
https://forum.ih8mud.com/threads/were-overstocked-on-fj40-quarter-panels.373760/
Got real steel rockers recently and they seem to be correct length, measure at 34 1/4" which matches what I could compare too. Don't see any measurements posted anywhere. Anyone able to take some measurements for comparison? These are the early style BTW.
I also got the mid and rear beds...