NP! I did a search on here and found somewhere what degree I needed. I believe the Specter Off Road website also will tell you what degree you need for what lift. Have given any thought to adding add-a-leafs in the front to level it out? Just a thought..... I ended up getting my shims from...
I'm taking the cap off of the master cylinder, and then going back to the passenger side rear wheel to start. I have my wife pump the hell out of them until they are hard and then hold them down while I open the bleeder valve, let the fluid/air shoot out and then close the valve. She then lets...
Thanks for your help. My buddy said the same thing. I just "THOUGHT" I had finally gotten it figured out. I just spent two hours and three bottles of brake fluid trying to get all of the air out of the lines. After all of that, I STILL had fluid shooting out of the farthest wheel each time I...
1. Year and model of vehicle: 1984 FJ60 baby!
2. Name of owner: DblTap
3. Name of vehicle (optional): Clifford - The Big Red Crusher
4. Mileage on the truck odometer: 217,000 and clicking....
5. Modifications, if any: 4 1/2" of shackles and add-a-leafs, 33" BFG Mud Terrains, Seqouia wheels w/ 2"...
All 6 lugs will bolt up. The backspacing is the only issue. I agree with the above post. You will probably need spacers. I put Sequoia wheels on my 60. The tires rubbed on the spring pack. Two inch spacers were just what the doctor ordered! There is some discussion on here about the safety of...
Okay, this is where I'm at. brake fluid comes out of the line going into the caliper when I disconnect it and I can blow air and residual fluid out of one opening on the caliper by by blowing compressed air into the other opening on the caliper. I have left the bleeder screw out of the caliper...
Looking for castor shims. $OR has them for $22 plus shipping. THat seems pretty high for what they are. Does anyone know of someplace they are less expensive. I was suprised to see there are none on eBay.
This is excellent information. I LOVE THIS SITE! :D Is there a website to check on what this "Cruiser Dan" has available or is there just a number you have to call him at?
Thank you for taking the time to help me. I really appreciate it! After 2 1/2 hours, the drivers side started to leak fluid. However, the passenger side did not. When I disconnected the line to the caliper, I immediately got fluid so I would say it is down to the passenger side caliper has an...
Okay, I took out the bleeders and replaced them with new ones. One of the old ones was obstructed and the other one was stripped due to PO using regular wrench instead of brake line wrench. I left them completely open for an hour before putting the new ones in. NO FLUID! No, there is no fluid...