Finally have a chance to get back to work on the old girl. She has been collecting dust in the garage for over 2 1/2 years. Getting some small windows to work on it and installed new carpet, which I proceeded to bugger up pretty good but, still better than the old. Anyway, as I am putting...
I originally posted in the What Did You Do with Your 80 This Weekend? section. Cant delete it but wanted to post it where it belongs.
A bit old but got to love the way they explain how differentials work. Start watching at about the 1:50 mark to get to the real meat of the video.
70 Series experts, I need some advice.
I have wanted a 70 series since they were first introduced but we were never blessed with them in this country. I love my 80 but dream of a 70 pickup to fill the void in my heart left by the one that could, or should have been.
Anyway, this one is up...
I have not been able to wrench on the old girl for at least a year. She has been collecting dust in the garage since then, not happy about it but I have had little to no time to work on her. Now I am up against a very tight deadline and have to get her back together before September and...
Sirs,
Does anyone know of a place who will do vinyl wrap for a taco grill? Trying to wrap up the to do list on my son's Taco before spring break. Had a new grill cera coated and need to wrap the rest of it in chrome. Any help would be greatly appreciated!
Merry Christmas CSC! Finally getting time to get my sons 2002 Taco set up the way he wants it. Kind of hard since he takes it school to NAU and we are in the Valley. Anyway, we are installing his lift now with SPC control arms on top, new Taco arms below. Need to get it aligned and with the...
Merry Christmas everyone!
I am on the hunt for an ES350 Ultra Luxury. Apparently as elusive as poverty pack 80s. Anyway, anyone know how or where to look to find it rather than going to each dealership's site?
Alternative I guess is to order one.
Any thoughts?
Very interesting. Cooler, rear AC, 5 spd, Carbed gas engine, factory winch, South American.
https://bringatrailer.com/listing/1997-toyota-land-cruiser-fzj80-3/
Hi Guys,
Wrong forum but I know a lot of folks here in the 80 side also have experience with these.
I am stuck in Salt Lake at Karl Malone Toyota with my 2017 GX. Going from Phoenix to Missoula to pick up my daughter and mover her Back to AZ (sad day in more ways than one for the family) in...
Hi Guys,
I am stuck in Salt Lake at Karl Malone Toyota with my 2017 GX. Going from Phoenix to Missoula to pick up my daughter and mover her Back to AZ (sad day in more ways than one for the family) in anycase, got into SLC late last night, parked the rig on a slight incline and set the EM...
One line obviously is from the master cylinder. The second then routes to the rear brakes. The third? If you plug the third "unidentified" line, will the LSPV still function?
Unbelievable. This is why I do my own wrenching if at all possible. I had an issue with my starter about 3 years ago, it was not turning over. Brought it in to a shop to have them address it. Well now, as I am converting over to hydro boost brakes, I see that some of the wiring they did is...
Just posted this in the bad seller section but, as they have a facility in Tolleson, I wanted to share my experience with the local members.
Speedway Motors, The Racing and Rodding Specialists
Speedway Motors is America's Oldest Speed Shop® and a trusted source for hot rod parts and racing...
https://www.speedwaymotors.com/
Speedway Motors online at the above address and I know they also sell on Amazon.
I needed some brake line fittings so I could install my hydro boost in my 80. I had planned three days, perhaps four, to get it plumbed in and all wrapped up. I ordered parts on...
Thought it was interesting. The 80 series had the "the best rough-road performance of any Land Cruiser" per Mr. T. They feel they have surpassed it. We will see.
Toyota Used the '90s Land Cruiser to Benchmark the 2022 Model -...
A 94 rig with, wait for it, 1,005 miles on the clock! Still, a lot of dough for this. That said, IT HAS LOCKERS!
A 1k-Mile 1994 Toyota Land Cruiser Just Sold For A Whopping $136,000 | Carscoops - https://www.carscoops.com/2021/06/this-1k-mile-1994-toyota-land-cruiser-just-sold-for-a-hefty-136000/
Hey guys, new to welding. The only time I have welded is by accident as an electrician. I have Just ordered a Hobart 210MVP with a spool gun. Based upon my experience and recommendations on this forum, going cheap is not the answer for such an important tool. Did some reading in this forum...
This is the clamp that supports the transmission line running to the radiator. It is located on the lower driver's side of the shroud. I ordered part # 32909-60020 but it is incorrect and I would rather not rig it again if I don't have to. Searched for it but kept getting irrelevant...
I will be installing 4.88s on my rig and have ZUK do the setup. I have done significant searching/reading and believe that Precision had the best gears but are NLA. Nitro appears to be a good product but, I am in no way an expert and do not wish to do this more than once. What I don't want is...