I have front and rear axles with knuckles and axle shafts. See pic some damage on long side axle shaft( trail spare quality) 100$ rear 200$ front
Smog set up all parts in the pic( I don’t know their names) 400$????
Mini truck power steering gearbox and frame mount includes hoses used for 6...
1978 Fj40. I swapped front and rear differentials when I did the SOA. I was starting to put the rear differential (was the original front) and noticed there was no spacer on the center pin. I left it on the other differential. Did I mess up ? I have front axles in and buttoned up. Do I need...
I purchased front and rear axles from an old rusted out fj60. I will use these to perform a SOA on my 40. The question is the front springs attached to the front axle had the following in white letters on them
F-60170A. Any idea if these are original? I don’t want to use them if they are lifted...
The roller bearings looked and felt good. I will clean the axles and take some pics of the bearing surfaces for yall to gander at. I have the 3rd member out and will clean it up and take some.pics to see if yall see anything amiss. At a minimum should I replace the roller bearing in the end of...
Success!!!! I removed the brake drum and used behind to move axle inward so I could remove the retaining clip... Then I spun the carrier around ..after some grinding to clearance the torch slag...and cut the other spider gear out with the torch. Removed the side gears and bamO.
I will remove...
Decided to go nuclear. Ps axle is removed unscathed. Still working on DS. Cut the spider gear out as described above. See pic. Removed spacer and then ps axle. Trying to get the ds brake drum removed so I can see if the axle has any play before doing any additional damage.....thanks for the ideas.
I have a new to me 1978 FJ40 with a welded rear diff. Spider gears welded together. I cannot get the spacer out to remove the axles. Any ideas. I have a torch, angle grinder, sawsal.....see pics.