Hi guys I just need to know if any of you out there have a TG twin-stick do you know how to dismantle them? I need to cut and modify my levers, and then have the levers powdercoated.
Cheers, Davo.
I am building a 6X6 L/C in Australia, and I need to be able to shift a divorce mounted mini-truck T/C in my driveline. The T/C has trail-gear twins in place, and I am quite happy to drill/tap/modify the sticks.
I was looking at a cable shifting setup like the advanve atlas setup, but I don't...
ahhh crap (can I say crap? I was gonna say s*** but I thought I can't say s***!!) Marlin are fresh out of toybox's for the h41/h42.
and none for along time!!! :mad:
Hi guys I have been doing some research and I just want to know what gearbox I would have in my 1982 HJ60,
I believe it would either be the H41 or H42, what is the difference between them??
Cheers,
Davo.
hey guys I have been looking into the air shox.
do i have to use bump stops with them?
I have been studying Tuff Truck and some trucks dont run them.
I dont plan to do any high speed gear or big drops.
Any ideas?
Hi guys I want to know if this idea will work for winching.
What I want to do is run a mid mounted winch and run the line forward and then to the back
Will this work if I use dynamica and put Warn 73851 Hawse Fairlead in the place of the blue lines, will the line create too much friction...
o.k. so I did a search on hydro steering. I didn't come up with what I need.
All I need to know is what is the best angle to setup rams on?
I have been told that when the double ended ram is fully extended to one side the tube connecting steering arm and ram should be straight with the least...
hey guys after reading the thread on Francesco_from_italy and his air-shock'd 40, I did some searching on this site and could find nothing to help me out.
If I want to lower my roll-centre (thus making my truck morestable on side slopes) what can I do?
I was guess the following would help...
Hey guys as some of you may know I am builing a 6-wheeler, and I have future plans to add an auto box to it so I want fairly good braking capability as I will be left with no engine braking.
What I would like to know is if I run 2 sets of 80-series rear calipers on one master cylinder on 2 sets...
Hey guys I am just considering my options as far as suspension and my rear links go. At this stage I know I am going to be using Evolution Machining & Fabrication Inc. heim joints (medium size). What I need peoples opinion on isif my mounting location for my shocks will work.
On the following...
Hey guys.
Here I go again with another whacky idea.........
I am putting a front and rear 3-link in my 60-series (that's not the whacky part!), I have trouble getting hold of some DOM? or HT? tube in darwin, but I can get aluminium rod. I am considering using Aluminium rod for my links. I would...
Hey guys just asking for some help, and ideas here on a Diff I woud like to build, and if anyone has any opinions on how I can buld it?
This will be going under my 60-series ute, with (soon-to-be) 3-link front with coil-overs.
Diamond housing 5.5" wider than standard.
lcwizards longer inner...
Hi guys.
I am planning a build at the moment and I want some really good gear reduction to run 39's.
I have been looking around the net for months now and have come across the Klune-V (Klunev.com) underdrive, and I think I would like to use one in my 60-series ute.
At the moment however...
hey guys. I am trying to find info on making a pair of square driveshafts for my trail-rig. If anyone has any links/ guidance/ pictures please post them up.
Reasons I want a square driveshaft:
1. To get more "slip" (travel before the driveshaft comes apart).
2. It is strong.
3. It is easy...
So after doing some searching and looking around the forums and tech books for a while I am at a cross roads.
I need some opinions on suspension tech (again).
I have been looking around the place at ideas on suspension and what shocks to use.
As some of you may know I have a 60-series L/C...
Hey guys.
I am looking at putting a front and rear 3-link in my cruiser ute. I am going to use a x-link at the front (which the guys over here in oz have found works awesome), but I also want to run a 3 link with x-link in the rear does anyone have any suggestions as to why it will not work...
So guys here we are just posting this thread so that I can get some opinions.:D
This is the scenario:
out wheeling, aired down (took the valve stems out until no air left) and now driving around on my staun beadlocks.:flipoff2:
Now I am going home (broke the car:whoops:), and I need to put air...
Hi guys I am considering pulling the glass ut of my car and just doing a simple vinyl window in the cruiser. and I don't want to throw away my old glass and forward quarter windows and glass and slider (the whole assembly)
If you pay freight from aus (I don't have any quotes) then you can have...