Search results for query: *

  • Users: Izeloz
  • Content: Threads
  • Order by date

Forum search Google search

  1. I

    RT help needed on Tcase problem

    My Tcase went out a few months ago and i finally pulled the trigger on a salvage replacement. Job seemed simple enough to do myself, felt like everything lined up perfectly and didnt anticipate any issues. However once i got everything put together i have no power and gears are grinding going...
  2. I

    Overland photo shoot

    Hey everyone, my name is Matt, and I'm a Land Cruiser-aholic. Now, with the introduction out of the way, I have a request for anyone out there who has an awesome looking overlander in Utah. The company I work for (Davidson Defense in Orem, UT) is wanting to do a lifestyle photo shoot with an...
  3. I

    Frozen power steering on my '91

    First some background. I have had a power steering gear box leak on my '91 3FE for quite a while. It got bad enough that I finally decided to rebuild the steering gear box to fix the leak. After I finished the rebuild and filled the system with new ATF (Dex3) I started to have a weird issue...
  4. I

    CDL Not Working ('91)

    I am trying to get my center differential lock working after some work on my dash. Background is that it's a '91 80-series with the pin-7 mod done. It was functional before I did the work. I removed the dash to apply sound deadening to the firewall. I reassembled everything and now the diff lock...
  5. I

    Seat foam plus seat covers?

    My seat foam in my '91 is totally trashed. I can see through the seat in a few spots and there is always a little snowfall of crumbled foam at the side of the seat. I like the manual seats and would like to keep them rather than do a seat swap. I am also on a limited budget (I know...a Land...
  6. I

    Custom headliner?

    I am getting sick of my sunroof leaking and not working right. Rather than repairing it the right way, I think I am just going to delete it. I plan to weld or Sikaflex a ~16ga steel or aluminum panel over the hole. Since my truck is a '91, it has the fragile headliner. Since I want to eliminate...
  7. I

    Any OEM height dual-rate springs available?

    I was wondering if anyone knew of a manufacturer that makes stock height springs in a true dual-rate configuration? Similar to the new Dobinson's VT line of springs?
  8. I

    Door lock issue

    I have a '91 80 and I've been doing work on my doors lately (window runs, rebuilding window motors, rebuilding door actuators) and something happened. It used to be that all I had to do to unlock all my doors was turn the key in the driver door lock twice in a row. Now it doesn't matter how many...
  9. I

    Stock replacement suspension options

    I am looking to freshen up my 30 year old suspension. I am practical almost to a fault, and honest enough that I believe I will be staying with a ~33" tired for the foreseeable future. I love the look and functionality of bigger tires and lifts, but I am almost never in a situation where I...
  10. I

    Departure angle 4X4Labs vs Delta vs?

    I was hoping someone might have some side by side comparison pictures of a 4X4Labs rear bumper vs. a Delta vs rear bumper? I'm trying to get an idea of how different the departure angle is between them. Ideally, I'd just have a 4X4Labs bumper modified to use Delta's swingarms and latch system.
  11. I

    PSA Re: door speakers on 80s without OEM front speakers

    I recently started rebuilding my doors. My truck is a '91 and doesn't have speakers in the front doors, or a cutout on the door card for them. The metal underneath has an opening for a speaker, and the wires are there, so I cut a hole for speakers in the new door cards I made. I didn't buy...
  12. I

    Any current source for dash grab handle?

    I just finished up repairing and reinstalling my dash on my '91. While I was at it, I cut holes for the OEM dash grab bar. I tried ordering the part twice. Both places showed in stock, only to find out later that there weren't any available. It appears to be NLA. Does anyone know where I could...
  13. I

    Dash refresh on a 1991

    I figured I would create a post about my ongoing dash refresh and repair and sound deadening installation. It's been a FAR bigger job that I anticipated. Hopefully someone will be helped by this. My dash was cracked in a few places and squeaking from somewhere on the left side. Being the typical...
  14. I

    OEM fuse pigtail part #?

    I am hoping someone has the answer to this. I would like to add a few circuits to the interior fuse block of my '91 cruiser. I was wondering if anyone had the part # for the OEM fuse pigtails (the part that clips into the back of the OEM fuse block)? I know all about adding a Blue Sea or other...
  15. I

    Shifter boot/gasket part number check

    I have the entire interior and dash in my '91 torn out to do some soundproofing, PM, wiring, etc. and I noticed that the boot or gasket thing under the plate where the shifters are is torn. I found a part number and was hoping somebody could verify it is correct before I place an order...
  16. I

    Dash reinforcement (what is it for?)

    I have my entire dash ripped out to repair cracks, soundproof firewall, etc., and I noticed this reinforcement plate on the lower dash. My truck doesn't have anything that goes here. Does anyone know why Toyota added it? Here are some pics:
  17. I

    HVAC foam source

    Besides OEM, does anyone have any idea where to get a good substitute for the foam they use in the HVAC ducting (like where two tubes come together, the junction is "sealed" with open cell foam)? Mine isn't looking so hot after 30 years.
  18. I

    HVAC bulb covers?

    I have a '91 and I just pulled my dash out to do a few things. One of the things I mean to do is replace the bulbs in the climate control. There are two 74 series bulbs in there. I tried LEDs and they were too bright/focused for the clear light diffuser in the climate control module.. The little...
  19. I

    Drivetrain lift?

    This is a relatively common thing for the mini-truck guys to do. I think Roger at 4crawler even sells motor mount and trans mount lift spacers for mini-trucks. Has anyone done this with an 80 to get a little bit more belly clearance? I have a body lift and was wondering if I could raise my tcase...
  20. I

    Rocker chop sliders

    I was wondering if anyone had anything to add on this subject? I plan to keep my lift a bit lower and am considering cutting out my perfectly straight and good rockers (gasp!) and welding in some 2X4 or some such as body-mounted sliders. I know @jcardona1 cut his rockers (but went with frame...
Back
Top Bottom