Search results for query: *

Forum search Google search

  1. G

    Questions about power steering leaking in reservoir.

    Would a leaky cap or leaking reservoir cause foam or frothy PS fluid? My PS whines like crazy n froths up, I replaced the cap, but I’m still getting some kind of leak from the reservoir, I put white tap around the upper o ring lip and doesn’t appear to be leaking from there, I think it might be...
  2. G

    VSV and VCV delete under upper intake, i have a few questions.

    So, found out I have a leak in the plenum gasket, I’m pulling the upper off when i get the parts in, but under there I know are a bunch of VSV and VCV, I know some are related to ERG, I was getting the code a while back but did the resistor fix and now don’t really need a lot of these under...
  3. G

    Help identifying a hose

    Was out messing with my truck, still trying to solve my P0171 issue, anyways, started to tear down the radiator lines and saw this hose, I recently replace the one right in front of it, but looks like I might be leaking from this one too, what is this called? Size etc? Biggest leak is from the...
  4. G

    Needing some help with P0171 code

    So, i was able to get rid of this code for 6 months, of course now its back, before i had fixed connector to MAF, both o2 sensors, and rear knock sensor and fuel filter, i got it to turn off for 6 months, now its back, kinda weird tho, I reset it on a hunting trip and it went away for like 200...
  5. G

    Aisin black hub fan clutch model and part number

    I was doing some searching found a few fan clutches out of 93-94 vehicles, but wanted to see if anyone had the “black hub” model number or part number to reference? There is a parts truck here locally wanted to make sure it was the right one n reference photos. Or if any has the aussy model...
  6. G

    Fan clutch issues, but new or rebuild?

    So after clearing up all the codes, I’m in upgrade mode, looking to swap the fan clutch, I get great AC up to like 95 degree OAT, it was 91 on my way home this morning from work n even in the Costco line for fuel stayed really cold, it’s really like 95 n above, it’s been 105 lately, so at lights...
  7. G

    Need some help with P0330 code.

    So I replaced both KS, truck will idle good with no CEL, I reset ECU, let it idle for like 20 mins to re-learn, after pressing on the gas a few times around 2k RPM it triggers the P0330 code again, reset n repeat it will do it again. I spliced the wire with the replacement found on here for the...
  8. G

    P0330 code, need a little help with wiring 82219-35010

    So now I have P0330 code., #2 knock sensor, replaced both sensors, the rear one the connector was no good, I ordered part # 82219-35010. So no real clear directions here except “splice”. One end fits on the knock sensor, the other end has 2 wires, one orange one black. So being the wire from the...
  9. G

    Needing some help with P0171code.

    I have had this code for a few months now, i can seem to clear it. So I have, cleaned MAF, replaced fuel filter, ran injector cleaner, seafoam, replaced hoses and gaskets and PCV, no leaks with a smoke test, and have replaced both o2 sensors with factory sensors. CAT was removed by PO, I also...
  10. G

    Need help with P0171, cant seem to figure it out.

    quick run down, 96 LC, no CAT, EGR "test" kit installed, replaced both O2 sensors with factory denso. New plugs, wires, new dizzy, new crank sensor, The upper intake to lower intake manifold was missing a bolt, i installed the bolt, CEL cleared on its own, but came back about 20 miles later. Did...
  11. G

    small coolant leak, need advice.

    Noticed my coolant was low, just did a coolant flush and replaced hoses, gaskets, thermostat, etc. The bypass tube, the L shape from the block ( i will include photos shortly) looks like where it is coming from. I replaced all 3 gaskets, I put the 2 on the inside pipe, seated, and then taped the...
  12. G

    Help identifying these hoses.

    I am still trying to fix my P0171 code. Found that 2 bolts were missing from up plenum, no more leak from intake, but I put a bore scope under the upper manifold and noticed these 2 hoses, one had the hose on it the other did not, the other end of the hose was attached to nothing, I found...
  13. G

    Under intake manifold vacuum hose diagram

    Working on my 96 LC, replacing some missing bolt, put my hand thru the upper and lower manifold and noticed to the left (facing the manifold part of the engine) to the left a hose dangling which appeared to come from the upper manifold, another hose dangling which appeared to come from the TB...
  14. G

    Loud whistle noise from TPS

    So today I replace some bolts that were missing on the intake manifold upper to lower. Still need help with hoses under but that’s another post. Anyways noticed a loud whistle noise after I started my truck. Took forever to realize it was the TPS, I would unscrew and adjust n it would make the...
  15. G

    Help needed with the upper intake manifold, bolts/nuts missing.

    So I have been battling the P0171 code, just did the o2 sensors, CEL turned off drove about 25 miles and back on. I was working on the cooking system when I noticed the bolts to the upper intake manifold appeared broken, well I noticed they were bolted from the bottom, but I was missing bolts...
  16. G

    What size LED bar for 80 series.

    I have 96 LC, found a killer deal on a 52” curved light bar, has the mounts too, well the lip mounts, what is the biggest I can mount above the windshield?
  17. G

    Timing chain tensioner gasket replacement, need a lil help.

    I think the gasket to the chain tensioner is leaking. I ordered the gasket. Looked at the FSM and it just says to inspect the plunger for movement, I watched a few videos and some say to crank the engine manually, but the FSM just says re-install n torque. Anyone done this job on a 96 can give a...
  18. G

    Need help, try to track down possible oil leak

    I attached photo of where I am seeing the leak, it drips down from where u bolt the metal lower radiator hose support it seems to be coming from the V groove I circled, I don’t notice anything above it from there, is there anything in that groove that has a gasket? Or is this may be from the...
  19. G

    P0401 code, need help with EGR system

    So been working on my LC and I keep getting P0401, I was getting P0171, but was able to clear it due to a vacuum leak. The 401 I keep getting, when I clear it it usually takes 50 miles for the CEL to pop back on. Here is what I have done, replaced both o2 sensors had to use the spacer for the...
  20. G

    Need help with codes P0330, p0171, p0135.

    So, did a tune up in the 96 LC, new plugs, wires, dizzy cap n rotor, found a ground in the wrong place, I’ll post photos, and videoI was getting code P0330 before, so I cleared the codes, truck seemed to run fine for about 30 mins now I’m getting these 3 codes. Truck seems to be running ok...
Back
Top Bottom